COVID-19 news
Why Covid-19 is an opportunity to rethink wellbeing
within construction
Coronavirus has caused industry leaders to rethink their
approach to work. While for many sectors this has meant a review of
where and when we work, for the construction sector the changes
that can be made in the workplace are more subtle in nature (08
January 2021). More...
New standard released for COVID-19 work protocols
Mining companies will start 2021 under a new International
Organisation for Standardisation (ISO) standard,
ISO/PAS (publicly available specification) 45005, to ensure safe
operations during the COVID-19 pandemic (08 January 2021). More...
Comcare: Guidance and resources for managing
COVID-19
Comcare is emphasising the importance of the effective use
of face masks, which are currently mandatory in certain
circumstances and locations in NSW and Victoria. Advice for each
jurisdiction is available from the New South Wales Government and the Victorian Government.
Comcare provides comprehensive, practical work health and safety guidance to assist
workers and employers to maintain safe and healthy workplaces
during the pandemic: Face masks; WHS duties and risk management;
Maintaining a COVID-safe workplace and Hygiene and cleaning regimes
(07 January 2021).
In the media
The solar panel 'fire season' is getting more
intense in Australia
A recent report rated Australia as one of the cheapest per
kilowatt for solar PV, but it questioned our safety standards.
Poor-quality solar rooftop components have led to an expanding list
of product recalls (14 January 2021). More...
Electrical lineworkers licensed for the first time in
Victoria
More than 2,000 electrical lineworkers (including cable
jointers) have signed up to receive their first lineworker licence
under Energy Safe Victoria's new licensing regime, which
commenced on 1 January 2021 (12 January 2021). More...
Overcoming the challenge of extreme temperatures
Heat stress management in mining, a sector highly exposed
to hot climate conditions and the threats of climate change is
benefitting from the use of advanced technologies (11 January
2020). More...
NSW regulator warns against plant maintenance
hazard
A contract maintenance worker has sustained injuries after
a workplace accident at Graymont's Attunga open cut limestone
mine near Tamworth, New South Wales (06 January 2021). More...
NSW adamant to keep dust exposure low
The New South Wales Resources Regulator has updated its
key compliance priorities for the first half of 2021, while
retaining respirable dust as one of its targets (04 January 2021).
More...
Falling building materials in Qld
In November 2020, glass balustrading from a high-rise
balcony shattered and fell onto a ground level building access way.
Initial enquiries indicate building rectification work was being
done on the balcony at the time (24 December 2020). More...
Trio convicted after worker's death
Two companies and a director have been penalised $250,000
after a contractor died when he was run over by a trailer at a
Mildura almond processer in 2018 (24 December 2020). More...
Disaster clean-up company fined over asbestos
dangers
A Gold Coast company specialising in disaster clean-up and
repair has been fined $6,000 for three offences around working with
asbestos, including the removal of more than 10m2 of asbestos
containing material without holding an asbestos removal licence or
authorisation (22 December 2020). More...
Published - articles, papers, reports
Model Work Health and Safety Regulations
Safe Work Australia: 07 January 2021
The current version of the model Work Health and Safety
(WHS) Regulations, dated 1 January 2021,
includes all amendments made
since 2011.
The amendments to the model WHS Regulations do not automatically
apply in a jurisdiction. For the model WHS Regulations, including
any amendments, to have effect in a jurisdiction, they must be made
in that jurisdiction. More...
What is a person conducting a business or
undertaking
Safe Work Australia: 05 January 2021
This document provides guidance on the interpretation and
application of the concept of a 'person conducting a business
or undertaking' used in the Work Health and Safety Act and
Regulations. More...
Safe Work Australia Fatality statistics
As at 31 December, there have been 166 Australian workers
killed at work in 2020.The numbers and industries may vary from one
report to the next, as Safe Work receives more detailed information
(to check for updates and more details on fatalities since 2003, go
to the Safe Work Australia Work-related fatalities
webpage).
In practice and courts
Comcare: Guide to Work Health and Safety
Undertakings
To provide guidelines in relation to Comcare's
acceptance of Work Health and Safety undertakings under the Work
Health and Safety Act 2011 (Cth) (December 2020). More...
GHS 7 transition - updates to the model WHS Regulations
amendment
Safe Work Australia has updated the model Work Health and
Safety Regulations (Hazardous Chemicals) Amendment 2020 and explanatory
statement for the transition to GHS 7.
Australia will begin a two-year transition to GHS 7 from 1 January
2021. These updated amendments will be inserted into the
model WHS Regulations from 1 January 2021.
Safe Work Australia has published a dedicated GHS 7 web page and
suite of information sheets. These information sheets provide
details about classification and labelling requirements for
workplace hazardous chemicals, and the duties of manufacturers,
importers, suppliers and end users. Learn more on the new GHS 7 web page.
Safe Work Australia: Model WHS Act comparison table now
available
Safe Work Australia has published a table comparing the
model Work Health and Safety (WHS)
Act and the WHS
Acts adopted by the harmonised jurisdictions. The table will be
updated periodically in consultation with jurisdictions, for
example, to reflect any amendments to the model
WHS Act or jurisdiction WHS
Acts. To learn more and to download the table, visit the Model WHS Act
cross-comparison table web page (15 December 2020).
NSW
SafeWork NSW: General diving work - qualifications
The newly issued an exemption for the general diving work
qualifications requirements of clause 171(1) of the Work Health and
Safety Regulation 2017. This exemption is granted until 31 December
2022. People who are qualified under AS 4005.2 - 2000 will need to
complete three additional units of competency by 31 December 2022
to be legally qualified to undertake general diving work in
NSW.
Queensland
esafe Newsletter - Electrical licensing disciplinary
action
In November and December 2020, the Electrical Licensing
Committee took disciplinary action against five licence holders (12
January 2021). More...
Resources Safety & Health Queensland: Safety Notices
Unsafe transport of fireworks in a passenger vehicle |
Resources Safety & Health Queensland
31 December 2020 | No 102
Explosives Inspectors have observed a number of examples of
non-compliant stowage of fireworks in passenger vehicles, in
contravention with the requirements of the Australian Explosives
Code for the Transport of explosives by road. More...
Tyre explosion following lightning strike | Resources
Safety & Health Queensland
23 December 2020 | No 383
Tyre explosion on truck following lightning strike.
Subject: Explosions; Flying material or objects; Noise; Pressure
storage or release; Weather events. More...
WorkSafe Victoria Safety Alerts
Crush injuries from working with unguarded plant
WorkSafe is issuing a safety alert about the risks
associated with operating plant with inadequate guarding.
Safety alert published. Guarding and safety devices on older power
presses may not prevent bodily access to the danger area of the
plant and therefore will not meet current Australian Standards (22
December 2020). More...
Cases
MPG Constructions Brisbane Pty Ltd v
The Regulator under the Work Health and Safety Act
2011 [2020] QIRC
235
WORK HEALTH AND SAFETY - EXTERNAL REVIEW - INTERLOCUTORY
APPLICATION - APPLICATION FOR STAY OF OPERATION OF DECISION AND
IMPROVEMENT NOTICE - whether jurisdiction to order stay pursuant to
s 229C of the Work Health and Safety Act 2011 - whether stay should
be ordered - whether the applicant has an arguable case - whether
the balance of convenience and competing rights of the parties is
in favour of the application - whether there is a risk of the
review being abortive without the stay
Work Health and Safety Act 2011 Qld s 229, s 229C; Work Health and
Safety Regulation 2011 Qld r 315K
Prosecution Result Summaries and Enforceable
Undertakings
Information about the most recent prosecution and
Enforceable Undertaking outcomes.
This publication does not deal with every important topic or change in law and is not intended to be relied upon as a substitute for legal or other advice that may be relevant to the reader's specific circumstances. If you have found this publication of interest and would like to know more or wish to obtain legal advice relevant to your circumstances please contact one of the named individuals listed.