The Ministry of Civil Aviation has released the Unmanned Aircraft System Rules, 2021. We provide a summary of the rules and take a look at some of the key highlights.
In June 2020, the Ministry of Civil Aviation released the draft Unmanned Aircraft Systems (UAS) Rules 2020 (UAS Rules or Rules). After seeking comments and holding consultations with stakeholders for almost 10 months,1 the government has finally notified the UAS Rules, 2021, which have come into effect on 15th March, 2021.2 These Rules replace the Civil Aviation Requires (CAR) on Remotely Piloted Aircraft System (RPAS) which have regulated the space since 2018 and bring in several changes for the industry.3 This blogpost provides a summary of the new Rules.
Key Highlights of the UAS Rules, 2021
- UAS categorised as airplane, rotorcraft and hybrid with further categorisation as remotely piloted aircraft, model remotely piloted aircraft and autonomous unmanned aircraft system.
- UAS classified as nano, micro, small, medium and large unmanned aircraft based on the maximum all up weight including its pay load ranging from <250gram to 150 kilograms. Nano UAs can be classified in the next higher category if it exceeds performance parameters of flight speed and height.
- Mandatory for individuals and companies to obtain approval from the DGCA to import, manufacture, trade, own or operate drones
- No Permission- No Take-off (NPNT) policy adopted for all UAS except for those in the nano category
- Micro and small UAS are not permitted from flying above 60m and 120 m, respectively.
- All UAS, except nano category, have to be equipped with flashing anti-collision strobe lights, flight data logging capability, secondary surveillance radar transponder, real-time tracking system and 360 degree collision avoidance system, among others.
- All UAS including nano category, are required to be equipped with Global Navigation Satellite System, Autonomous Flight Termination System or Return to Home option, geo-fencing capability and flight controller, among others.
- UAS prohibited from flying in strategic and sensitive location, including near airports, defence airports, border areas, military installations/facilities and areas earmarked as strategic locations/vital installations by the Ministry of Home Affairs.
- Nano, micro and small UAS operations limited to within the visual line of sight and are prohibited from delivery of goods.
- Delivery of goods permitted by medium and large UAS.
- Research and development (R&D) organisations, including start-ups, authorised UAS manufacturer, any accredited recognised institution of higher education located in India, are permitted to carry out R&D of UAS only after obtaining authorisation from the DGCA.
- Penalties ranging between rupees ten thousand and one lakh for individuals, and for organisations, a 200, 300 and 400% of the amount specified for individuals, based on the size of the organisation.
Summary of the UAS Rules, 2021
S.No. | Provisions | Proposed Rule |
Definitions Introduced | ||
1. |
Geo-fencing |
Geo-fencing is defined as the restriction of movement of UAS within a defined virtual space for a real-world geographic location using the global positioning system or radio frequency identification to define three dimensional geographical boundaries.4 The Rules require all UAS to be equipped with geo-fencing capabilities.5 |
2. |
Drone Swarm |
Drone Swarm has been defined as a fleet of unmanned aircraft either in communication with one another or with remote control and deployed together in order to accomplish a common objective, controlled either autonomously or by a remote control.6 The Rules prohibit a UAS, apart from micro and nano UAS, from operating as a part of a drone swarm. |
3. |
Prototype Unmanned Aircraft System |
Prototype UAS is one that is developed for the purpose of research and development or for obtaining a certificate of manufacture and airworthiness.7 A prototype UAS cannot be manufactured or imported without prior permission from the DGCA.8 |
Categorisation of UAS | ||
4. |
Categorisation of UAS |
UAS is first categorised on the basis of flight, including the following:9
The categorization of UAS as aeroplane/rotocraft/hybrid is only required to be mentioned while obtaining a remote pilot license. However, it doesn't have any significance or impact beyond this and the Rules similarly apply to all categories of UAS. |
5. |
Subsequent categorisation of UAS |
The UAS can be further categorized as follows:12
Autonomous unmanned aircraft system: these are UAS that do not require pilot intervention in the management of the flight. The operations of the autonomous UAS can only take place in accordance with the conditions and in the areas specified by the DGCA.14 |
Authorisations | ||
6. |
Eligibility |
To act as an unmanned aircraft system importer, manufacturer, trader, owner or operator, an authorisation is required from the Director General of Civil Aviation (DGCA). The eligibility for such authorisation is as follows:15
Association of persons or body of individuals or a local authority or any legal entity must have their principal place of business within India. |
7. |
Security Clearance |
The DGCA may require an applicant to obtain a security clearance of a person, including directors in case of corporate bodies or other persons in top management positions.16 The DGCA, only after such security clearance, may grant an authorisation. No such clearance is required for Central Government and State Government or their agencies.17 |
8. |
Procedure for Authorisation for a UAS importer, manufacturer, trader, owner or operator |
Application has to be made to the DGCA as per Form UA-1 with a fee along with submission of the required documents.18 Only after satisfying the eligibility requirement, the security clearance and the application procedure, the DGCA will provide the applicant a unique authorisation number.19 |
9. |
Validity of Authorisation |
The validity period of the authorisation is up to 10 years.20 |
Manufacture and Import | ||
10. |
Manufacture and import of prototype UAS |
Prior permission has to be obtained from the DGCA manufacture and import of prototype.21 The DGCA may specify any additional technical requirements for granting permission for manufacture or import.22 Upon satisfaction that the prototype UAS conforms to the requirements specified under the Rules, the DGCA will allot a unique prototype identification number which has to be affixed on each prototype. |
11. |
Certificate of manufacture and airworthiness of UAS |
The certificate of manufacture and airworthiness is issued to certify that the UAS, to be manufacturer or imported, meets the specified requirements and is in a condition for safe operation.23 The DGCA may appoint a testing laboratory to carry out the testing to ascertain airworthiness and compliance with manufacturing requirements,24 and provide a certificate on the basis of the test report.25 This certification is necessary to operate any UAS in India. |
12. |
Import of UAS |
Import of a UAS is only permitted after a The certificate of manufacture and airworthiness has been obtained by the importer. The DGCA may notify components eligible to be imported by an authorised importer.26 An authorised importer may apply to import in abidance with import regulations notified by the Director General of Foreign Trade27 |
13. |
Safety Oversight Mechanism |
An authorized unmanned aircraft system manufacturer has to comply with the requirements specified by the DGCA and is subject to inspection and safety oversight by the DGCA.28 |
14. |
Manufacture and import of same type and class of UAS |
Based on the certificate of manufacture and airworthiness of a particular type and class of UAS, an authorized manufacturer or importer can manufacture or import one or more UAS of same type and class of UAS.29 This implies that for manufacturing or importing UAS of the same type/class the manufacturer or importer does not have to obtain a certificate of manufacture and airworthiness multiple times. |
Airworthiness Standard | ||
15. |
Technical Requirements |
To obtain a airworthiness certificate, the applicant must ensure that the UAS is equipped with the specifications mentioned in the Rules such as GNSS, RTH, flashing strobe lights, geo facing capability, NPNT, 360 degrees collision avoidance system, etc.30 |
16. |
Approvals |
Equipment Type Approval from the Wireless Planning and Coordination Wing, is mandatory for de-licensed frequency band(s) and wireless operating licence is mandatory for operating in licensed frequency band(s).31 |
17. |
Test Flights |
Test flights of UAS may be carried out for obtaining certification, or for conducting research and development.32 Prior clearance has to be obtained from the local authority, and mandatory Air Traffic Control clearance and Air Defense Clearance from the nearest Air Traffic Control.33 |
Maintenance | ||
18. |
Maintenance Centres |
Maintenance centres to be established with trained personnel to undertake maintenance of UAS.34 In addition to keeping record of maintenance and complying with safety requirements,35 the Centre has to issue a certificate of maintenance in accordance with the procedure laid down to certify the safe operation of the UAS after the repair/modification.36 |
Identification and Transfer of Unmanned Aircraft | ||
19. |
Conditions |
UAS can be used operated and transferred to another individual or company if it is registered with the DGCA and a certificate of conformance has been issued by manufacturer/ importer.37 |
20. |
Unique Identification Certificate |
A unique identification certificate containing unique identification number (UIN), category, class, model number, manufacturer's name with serial number, etc will be issued by the DGCA.38 |
21. |
Transfer of UAS |
The transfer of ownership of UAS has to be approved by the DGCA. Following the transfer, the UIN will also be linked to the transferee.39 |
Operation | ||
22. |
Operator |
In addition to obtaining a permit by fulfilling the standard operating procedure requirement, the operator has several responsibilities under the Rules.40 Some of them are mentioned below:
|
23. |
Flying Restrictions |
The UAS has to be flown at the height prescribed in the Rules or as specified in the permit issued by the DGCA.41 For instance, a micro UAS can only fly at a maximum height of 60m. |
24. |
Student Remote Pilot License |
Any individual can obtain a student remote pilot license for operation of UAS, after undergoing oral examination and medical examination, and after an authorised training organisation has been satisfied with the fulfilment of the specified requirements.42 An individual, before commencing flying training for the purpose of obtaining a remote pilot license has to be in possession of a student remote pilot license.43 |
25. |
Remote Pilot License |
For obtaining a remote pilot license, requirements of training and examination have to be fulfilled.44 The validity of the license is 10 years, which can be renewed.45 |
26. |
Remote Pilot Instructor |
A remote pilot instructor has to obtain a license and undergo training.46 |
27. |
Authorised Training Organisation |
The training organisation must also be authorised by the DGCA.47 |
28. |
Permission for Flight |
No UAS, except nano class, can operate a UAS without prior permission from the DGCA.48 |
29. |
No operation areas |
Several areas have been added to restricted areas for drone operations. Some of the strategic ones are listed below:
|
30. |
Unmanned Aircraft System Traffic Management (UTM) license |
The Central Government or any organisation authorised by the Central Government can establish a UTM in the Indian airspace. The organisation has to obtain a license from the DGCA which is valid for a period of 10 years and can be renewed.49 The organisation has to submit a UTM system service manual with operational requirements, technical specifications and standards and additional requirements specified by the DGCA. |
Drone Ports | ||
31. |
Authorisation and eligibility |
Drone ports, for arrival, departure, surface movement and associated maintenance or commercial activities of compliant UAS, can only be established in permitted areas after obtaining licence and authorisation from the DGCA. The eligibility criteria to obtain a license for a drone port is the same as the criteria for obtaining authorisation for being a UAS importer, manufacturer, trader, owner or operator (mentioned in 6 above). |
Research and development | ||
32. |
Authorisation for R&D organisation |
Only an authorised R&D organisation can carry out R&D of UAS.50 Such authorisation has to be obtained from the DGCA. Only the following organisations are eligible for such authorisation:
Such a compliance requirement of obtaining an authorisation for R&D deters innovation. In addition, placing an eligibility requirement on R&D organisations will also discourage R&D in UAS. |
Insurance | ||
33. |
Insurance |
Valid third-party insurance has to be availed to cover incidents causing death or bodily injury to any person or damage to property. Nano class is exempted from the insurance requirement.51 |
Miscellaneous | ||
34. |
Authorisations and permits to be obtained under the Rules |
The following licenses permits have to be obtained by the participants of a UAS ecosystem under the Rules:
Each actor in the UAS ecosystem has to approach the DGCA several times to obtain authorisations/licences, certificates and permissions. Obtaining these also have lengthy procedures laid out under the Rules. For instance, for an individual to obtain a remote pilot licence, he/she has to follow the following procedure:
Similarly, for conducting UAS research and development, an eligible entity has to obtain the following licences:
|
35. |
Restrictions and cancellations on license, permits etc |
The Rules empower the DGCA to place further restrictions on Licence, Certificate, Authorisation, Permit or Approval,52 in addition to cancellation and suspension.53 The DGCA may also preclude the exercise of licenses and permits in writing.54 This gives wide powers with the DGCA to impose any conditions or restrictions, in addition to the several existing requirements in the Rules. This creates an environment of uncertainty as applicants in the UAS ecosystem are not fully aware of the conditions that may be imposed on them. |
36. |
Exemptions |
The Central Government has the power to exempt any UAS or class of UAS or any person or class of persons from the operation of the Rules, subject to conditions that may be specified.55 |
37. |
Fee for various services |
The rules impose a fee for granting/issuing, among others,:
Cumulatively, for obtaining several authorisations and permits, individuals and entities have to collectively pay a lot of fee to the DGCA. |
38. |
Penalties |
For individuals, penalties range between rupees ten thousand and one lakh for individuals.56 For organisations, which includes a body corporate or an association of individuals, the penalties range from 200, 300 and 400% of the penalties applicable to individuals, based on the size of the organisation.57 |
39. |
Compounding of offence |
In lieu of a penalty, the Rules permit compounding of certain offences through the deposit of fee. The amount for compounding of offence committed range from Rupees Twenty-Five Thousand to Five Lakhs for an individual. The amount of compounding of offences involving Nano, Micro, Small, Medium and Large unmanned aircraft is charged at the rate of 100, 200, 300, 400 and 500%, respectively, of the amount specified for the individual. In cases where multiple classes of unmanned aircraft are involved in an offence, then, the amount of compounding is levied at the rate applicable for the highest class of unmanned aircraft. The amount of compounding for offences committed by an organization varies with the size of the organization:
This can cumulatively result in a higher penalty for an entity. For instance, in a contravention, with a penalty of Rupees five lakh for an individual, which involves a large UAS, and where such contravention is committed by a large organization with over 200 employees, the penalty can go up to Rupees one crore. |
Conclusion
The UAS Rules have brought in several changes compared to the CAR on RPAS. There are both positives and negatives for the industry:
- Positives: The Rules bring in certain welcome additions such allowing student remote pilots to operate UAS, allowing goods delivery by medium and large UAS and permitting UAS operations beyond visual line of sight for UAS. These aspects were missing from the CAR on RPAs and are areas of opportunities for the industry.
- Negatives: The Rules impose several requirements for obtaining license and authorisations by remote pilots, operators, manufacturers or importers, training organisations and R&D organisations, placing a significantly high burden on the applicants. In addition, the procedures to obtain these licenses are cumbersome and bound to result in process delays. Further, imposing authorisations for undertaking R&D in the UAS space will deter and discourage innovation. In addition, the amount of compounding of offences are very high and can go up to Rupees one crore. Lastly, the UAS Rules don't mention any timelines for obtaining authorizations and licenses, so there is limited clarity on implementation of the Rules.
Although there is a need for a governing framework for the UAS ecosystem, the Rules impose a heavy compliance burden on all participants in the ecosystem which may slow down growth in this sector.
Footnotes
[2] Unmanned Aircraft Systems (UAS) Rules, 2021, http://egazette.nic.in/WriteReadData/2021/225860.pdf
[3] Civil Aviation Requirements, Remotely Piloted Aircraft System, http://bathindapolice.in/civil.pdf.
[4] Rule 2(1)(zb), UAS Rules, 2021.
[5] Rule 9(8)(c), UAS Rules, 2021.
[6] Rule 2(1)(z), UAS Rules, 2021.
[7] Rule 2(1)(zj), UAS Rules, 2021.
[8] Rule 8(1), UAS Rules, 2021.
[9] Rule 3(1) UAS Rules, 2021.
[10] Rules 2(1)(b) 2021Rules.
[11] Rules 2(1)(zr) 2021Rules.
[12] Rule 3(2), UAS Rules, 2021.
[13] Rules 62, UAS Rules, 2021.
[14] Rules 63, UAS Rules, 2021.
[15] Rules 5(a), (b) and (c), UAS Rules, 2021.
[16] Rule 6(4), UAS Rules, 2021.
[17] Rule 6(4), UAS Rules, 2021.
[18] Rule 6, UAS Rules, 2021.
[19] Rule 6(5), UAS Rules, 2021.
[20] Rule 6(6), UAS Rules, 2021.
[21] Rule 8(1) 2021Rules.
[22] Rule 8(4) 2021Rules.
[23] Rule 2(1)(p), UAS Rules, 2021.
[24] Rule 9(2) UAS Rules, 2021.
[25] Rule 9(18), UAS Rules, 2021.
[26] Rule 10 (4), UAS Rules, 2021.
[27] Rule 10(6), UAS Rules, 2021.
[28] Rule 12, UAS Rules, 2021.
[29] Rule 13, UAS Rules, 2021.
[30] Rule 9(8), UAS Rules, 2021.
[31] Rule 9 (13), UAS Rules, 2021.
[32] Rule 15(1), UAS Rules, 2021.
[33] Rule 15(5), UAS Rules, 2021.
[34] Rule 14, UAS Rules, 2021.
[35] Rule 14(7), UAS Rules, 2021.
[36] Rule 14(8), UAS Rules, 2021.
[37] Rule 17, UAS Rules, 2021.
[38] Rule 18(3), UAS Rules, 2021.
[39] Rule 19(5), UAS Rules, 2021.
[40] Rule 27, UAS Rules, 2021.
[41] Rule 29, UAS Rules, 2021.
[42] Rule 30, UAS Rules, 2021.
[43] Rule 30(10), UAS Rules, 2021.
[44] Rule 31, UAS Rules, 2021.
[45] Rule 31(15), UAS Rules, 2021.
[46] Rule 31, UAS Rules, 2021.
[47] Rule 34, UAS Rules, 2021.
[48] Rule 35(1), UAS Rules, 2021.
[49] Rule 50(10), UAS Rules, 2021.
[50] Rule 56, UAS Rules, 2021.
[51] Rule 66, UAS Rules, 2021.
[52] Rule 71, UAS Rules, 2021.
[53] Rule 72, UAS Rules, 2021.
[54] Rule 71(2), UAS Rules, 2021.
[55] Rule 70, UAS Rules, 2021.
[56] Rule 77, UAS Rules, 2021.
[57] Rule 77, UAS Rules, 2021.
The content of this article is intended to provide a general guide to the subject matter. Specialist advice should be sought about your specific circumstances.