United States: FDA Finalizes Guidance On Postmarket Management Of Medical Device Cybersecurity

On December 28, 2016, the Food and Drug Administration (FDA) issued final guidance on the postmarket management of cybersecurity in medical devices.1 The guidance outlines nonbinding recommendations on how device manufacturers should monitor, identify, and address cybersecurity vulnerabilities. It also describes a risk-based framework to help manufacturers determine when device modifications that address cybersecurity vulnerabilities must be reported to FDA.

Device manufacturers should review this final guidance and consider how to incorporate its recommendations into their postmarket management activities. This Alert summarizes key aspects of the guidance and identifies key differences from the draft version issued in January 2016.2

I. General Principles of a Postmarket Cybersecurity Management Program

The growing use of networked medical devices has opened important new avenues for improving patient care. At the same time, these developments have increased the exposure of devices and computer networks to cybersecurity threats. Failure to maintain cybersecurity can impact device functionality and result in patient harm, loss of data, or exposure of other connected devices to security threats.

To address cybersecurity vulnerabilities during the premarket development stage, FDA has previously recommended that manufacturers consider cybersecurity during the design and software validation process for a device. FDA's recommendations are outlined in its 2014 guidance, "Content of Premarket Submissions for Management of Cybersecurity in Medical Devices," discussed in a previous Ropes & Gray Alert.

Recognizing that not all cybersecurity risks can be foreseen and mitigated solely through premarket activities, however, FDA considers it essential that manufacturers implement postmarket cybersecurity risk management programs. The final postmarket cybersecurity guidance recommends that a postmarket cybersecurity risk management program address vulnerabilities that may permit unauthorized access, modification, misuse, or denial of use of a device, or the unauthorized use of information that is stored, accessed, or transferred from a medical device to an external recipient, and that may result in patient harm. Specifically, FDA recommends that such a program include the following critical components:

  • Monitoring cybersecurity information sources for identification and detection of cybersecurity vulnerabilities and risks;
  • Maintaining robust software lifecycle processes that include mechanisms for monitoring third-party software components for new vulnerabilities and performing design validation and validation for software updates and patches used to remediate vulnerabilities;
  • Understanding, assessing and detecting vulnerabilities;
  • Establishing and communicating processes for cybersecurity vulnerability intake and handling;
  • Using threat modeling to define how to maintain safety and essential performance of a device by developing mitigations that protect, respond, and recover from a cybersecurity risk;
  • Adopting a coordinated vulnerability disclosure policy and practice; and
  • Deploying mitigations that address cybersecurity risk early and prior to exploitation.

FDA's guidance recognizes that cybersecurity is a shared responsibility between public and private stakeholders, a principle set forth in Presidential Policy Directive 21 – Critical Infrastructure Security and Resilience. FDA encourages device manufacturers to adopt the recommendations on cybersecurity set out in the voluntary "Framework for Improvement Critical Infrastructure Cybersecurity" published by the National Institute of Standards and Technology (NIST), with collective input from various government agencies and the private sector. FDA also encourages device manufacturers to look to standards, guidelines, best practices, and frameworks established by the security industry to adopt a culture of cybersecurity risk management. In addition, FDA specifically encourages device manufacturers to share cybersecurity threat information as active participants in Information Sharing Analysis Organizations (ISAOs) and to be aware of sources of cybersecurity threat information that fall outside their typical information sources, such as the U.S. Department of Homeland Security Industrial Control Systems Cyber Emergency Response Team (ICS-CERT).

II. Cybersecurity Risk Management

FDA recommends that a manufacturer establish, document, and maintain throughout the lifecycle of a device an ongoing process for identifying cybersecurity hazards, estimating and evaluating the associated risks, controlling those risks, and monitoring the effectiveness of the controls. FDA believes that this process should include risk analysis, risk evaluation, risk control, and incorporation of production and post-production information. In evaluating the risk of patient harm, FDA recommends that manufacturers take into account the exploitability of the cybersecurity vulnerability and the severity of patient harm if the vulnerability were to be exploited.

The guidance also encourages manufacturers to define, as part of their comprehensive cybersecurity risk management program, the safety and essential performance characteristics of their devices, the resulting severity of patient harm if the cybersecurity of the device is compromised, and associated risk acceptance criteria. FDA defines "patient harm" to be physical injury or damage to the health of patients. FDA emphasizes threat modeling as a tool to facilitate the understanding and assessment of the vulnerability and the potential for patient harm. Threat modeling also helps determine whether a proposed remediation can be expected to control a risk of patient harm, such that the risk is an acceptable one. FDA recommends that manufacturers consider employing a cybersecurity vulnerability assessment tool or similar scoring system for assessing vulnerabilities and determining the need for, and urgency of, the response. FDA identifies one such tool in the guidance, the Common Vulnerability Scoring System, Version 3.0, as well as a number of additional standards and guidelines that may help triage vulnerabilities.

III. Remediating and Reporting Cybersecurity Vulnerabilities

Using the risk management tools and processes described above, FDA advises manufacturers to reach a binary determination on whether a particular risk is controlled or uncontrolled. If the risk is uncontrolled, FDA recommends implementing additional remediation measures until the risk is controlled. In the guidance, FDA encourages manufacturers to engage in efficient, timely, and ongoing assessment of cybersecurity risks in marketed devices. For routine cybersecurity software updates and patches, FDA states that it will not typically require premarket review to clear or approve the software changes. In addition, when a manufacturer strengthens a device's cybersecurity to address controlled risks of patient harm (i.e., where there is already sufficiently low residual risk of patient harm to the vulnerability), FDA considers those changes to be device "enhancements," as opposed to device "corrections." As a result, such changes are not required to be reported as device corrections under 21 C.F.R. Part 806. FDA also states that changes to a device made solely to address loss of confidentiality of patient information are typically device enhancements that would not be required to be reported under 21 C.F.R. Part 806.

In contrast, when a manufacturer takes action to remediate an otherwise uncontrolled risk of patient harm (i.e., where there is unacceptable residual risk of patient harm due in the absence of additional risk mitigations), FDA states that a manufacturer should evaluate the device changes to assess the need to submit a premarket submission to the FDA (e.g., premarket approval application (PMA) supplement or a 510(k)). FDA explains that, in the absence of remediation, a device with uncontrolled risk of patient harm may be considered in violation of the Federal Food, Drug, and Cosmetic Act and be subject to enforcement action.

In addition, FDA states that remediations of uncontrolled risks would ordinarily be required to be reported to the agency as removals or corrections under 21 C.F.R. Part 806. However, through the guidance, FDA explains that it is establishing an enforcement discretion policy whereby FDA does not intend to enforce reporting requirements under 21 C.F.R. Part 806 for changes to address uncontrolled risks under certain circumstances. Specifically, FDA will not enforce reporting requirements if:

  1. There are no known serious adverse events or deaths associated with the vulnerability;
  2. Within 30 days of learning of the vulnerability, the manufacturer notifies users of the vulnerability and identifies and implements a device change to bring the residual risk to an acceptable level;
  3. No later than 60 days after learning of the vulnerability, the manufacturer validates, implements, and distributes the deployable fix to its customers; and
  4. The manufacturer is an active participating member of an Information Sharing Analysis Organization (ISAO).

Device manufacturers should consider whether to modify their procedures for correction and removal reporting under 21 C.F.R. Part 806 to reflect this FDA policy.

FDA also explains that, for both controlled and uncontrolled risks, a manufacturer's changes to address those should be submitted in a periodic report to FDA if the device is approved under a PMA.3

IV. Criteria for Defining Active Participation by a Manufacturer in an ISAO

As noted above, one of the criteria for FDA's enforcement discretion policy on the reportability of non-routine cybsecurity-related device changes is whether the manufacturer is an active participating member of an ISAO. The final guidance lays out criteria for what it means to be an active participating ISAO member. Specifically, FDA says that it will consider whether:

  • The manufacturer is a member of an ISAO that shares vulnerabilities and threats that impact medical devices;
  • The ISAO has documented policies pertaining to participant agreements, business processes, operating procedures, and privacy protections;
  • The manufacturer shares vulnerability information with the ISAO, including any customer communications pertaining to cybersecurity vulnerabilities; and
  • The manufacturer has documented processes for assessing and responding to vulnerability and threat intelligence information received from the ISAO.

FDA recommends that manufacturers maintain objective evidence to demonstrate that their participation in an ISAO meets these criteria. FDA also notes that the agency's Center for Devices and Radiological Health has entered into a Memorandum of Understanding with one ISAO, the National Health Information Sharing & Analysis Center (NH-ISAC). FDA does not, however, take the position that manufacturers must participate in the NH-ISAC to meet the agency's criteria for ISAO participation.

V. Key Differences from Draft Guidance

The final guidance differs from the draft in several important respects. Among other things, the final guidance:

  • Uses the potential for patient harm, rather than risk to the safety and effectiveness of the device itself, as the touchstone for assessing risks posed by cybersecurity vulnerabilities. This change focuses the guidance's risk management recommendations activities around risk to health, a concept with which device manufacturers are familiar from existing FDA regulations, rather than the new concept of "essential clinical performance" of a device that FDA had emphasized in the draft guidance.
  • Extends to 60 days the time that device manufacturers have to remediate an uncontrolled risk while remaining subject to FDA's enforcement discretion policy for reporting a device correction under 21 C.F.R. Part 806, provided that the manufacturer communicates interim controls to its customers and the user community within 30 days after learning of the vulnerability. The draft guidance would have provided only 30 days to identify and implement device changes or controls to bring the risk to an acceptable level.
  • Provides additional details and guidance to manufacturers on a number of subjects, including sources of guidance for performing risk management activities, the criteria for being considered an active participant in an ISAO, and additional examples of how to determine whether a risk is controlled or uncontrolled.

VI. Consequences for Medical Device Manufacturers

The increasing sophistication of software-driven and networked medical devices is delivering huge improvements in medical care, but also presents the potential for risks to patient health and privacy due to cybersecurity vulnerabilities. FDA's guidance document reflects the increasing expectations on device manufacturers to establish sophisticated, proactive cybersecurity practices and procedures that begin when a device is initially being designed and continue throughout the device lifecycle. Device manufacturers that have not already done so should consider conducting a comprehensive assessment of their cybersecurity practices and procedures, taking into account the recommendations in the FDA pre- and post-market guidance documents and third-party standards, and evaluate whether to become an active participant in an ISAO.


1. FDA Guidance, "Postmarket Management of Cybersecurity in Medical Devices" (Dec. 28, 2016).

2. FDA Draft Guidance, "Postmarket Management of Cybersecurity in Medical Devices" (Jan. 15, 2016). See Ropes & Gray's previous Alert on the draft guidance.

3. See 21 C.F.R. § 814.84.

The content of this article is intended to provide a general guide to the subject matter. Specialist advice should be sought about your specific circumstances.

To print this article, all you need is to be registered on Mondaq.com.

Click to Login as an existing user or Register so you can print this article.

Similar Articles
Relevancy Powered by MondaqAI
In association with
Related Topics
Similar Articles
Relevancy Powered by MondaqAI
Related Articles
Related Video
Up-coming Events Search
Font Size:
Mondaq on Twitter
Register for Access and our Free Biweekly Alert for
This service is completely free. Access 250,000 archived articles from 100+ countries and get a personalised email twice a week covering developments (and yes, our lawyers like to think you’ve read our Disclaimer).
Email Address
Company Name
Confirm Password
Mondaq Topics -- Select your Interests
 Law Performance
 Law Practice
 Media & IT
 Real Estate
 Wealth Mgt
Asia Pacific
European Union
Latin America
Middle East
United States
Worldwide Updates
Registration (you must scroll down to set your data preferences)

Mondaq Ltd requires you to register and provide information that personally identifies you, including your content preferences, for three primary purposes (full details of Mondaq’s use of your personal data can be found in our Privacy and Cookies Notice):

  • To allow you to personalize the Mondaq websites you are visiting to show content ("Content") relevant to your interests.
  • To enable features such as password reminder, news alerts, email a colleague, and linking from Mondaq (and its affiliate sites) to your website.
  • To produce demographic feedback for our content providers ("Contributors") who contribute Content for free for your use.

Mondaq hopes that our registered users will support us in maintaining our free to view business model by consenting to our use of your personal data as described below.

Mondaq has a "free to view" business model. Our services are paid for by Contributors in exchange for Mondaq providing them with access to information about who accesses their content. Once personal data is transferred to our Contributors they become a data controller of this personal data. They use it to measure the response that their articles are receiving, as a form of market research. They may also use it to provide Mondaq users with information about their products and services.

Details of each Contributor to which your personal data will be transferred is clearly stated within the Content that you access. For full details of how this Contributor will use your personal data, you should review the Contributor’s own Privacy Notice.

Please indicate your preference below:

Yes, I am happy to support Mondaq in maintaining its free to view business model by agreeing to allow Mondaq to share my personal data with Contributors whose Content I access
No, I do not want Mondaq to share my personal data with Contributors

Also please let us know whether you are happy to receive communications promoting products and services offered by Mondaq:

Yes, I am happy to received promotional communications from Mondaq
No, please do not send me promotional communications from Mondaq
Terms & Conditions

Mondaq.com (the Website) is owned and managed by Mondaq Ltd (Mondaq). Mondaq grants you a non-exclusive, revocable licence to access the Website and associated services, such as the Mondaq News Alerts (Services), subject to and in consideration of your compliance with the following terms and conditions of use (Terms). Your use of the Website and/or Services constitutes your agreement to the Terms. Mondaq may terminate your use of the Website and Services if you are in breach of these Terms or if Mondaq decides to terminate the licence granted hereunder for any reason whatsoever.

Use of www.mondaq.com

To Use Mondaq.com you must be: eighteen (18) years old or over; legally capable of entering into binding contracts; and not in any way prohibited by the applicable law to enter into these Terms in the jurisdiction which you are currently located.

You may use the Website as an unregistered user, however, you are required to register as a user if you wish to read the full text of the Content or to receive the Services.

You may not modify, publish, transmit, transfer or sell, reproduce, create derivative works from, distribute, perform, link, display, or in any way exploit any of the Content, in whole or in part, except as expressly permitted in these Terms or with the prior written consent of Mondaq. You may not use electronic or other means to extract details or information from the Content. Nor shall you extract information about users or Contributors in order to offer them any services or products.

In your use of the Website and/or Services you shall: comply with all applicable laws, regulations, directives and legislations which apply to your Use of the Website and/or Services in whatever country you are physically located including without limitation any and all consumer law, export control laws and regulations; provide to us true, correct and accurate information and promptly inform us in the event that any information that you have provided to us changes or becomes inaccurate; notify Mondaq immediately of any circumstances where you have reason to believe that any Intellectual Property Rights or any other rights of any third party may have been infringed; co-operate with reasonable security or other checks or requests for information made by Mondaq from time to time; and at all times be fully liable for the breach of any of these Terms by a third party using your login details to access the Website and/or Services

however, you shall not: do anything likely to impair, interfere with or damage or cause harm or distress to any persons, or the network; do anything that will infringe any Intellectual Property Rights or other rights of Mondaq or any third party; or use the Website, Services and/or Content otherwise than in accordance with these Terms; use any trade marks or service marks of Mondaq or the Contributors, or do anything which may be seen to take unfair advantage of the reputation and goodwill of Mondaq or the Contributors, or the Website, Services and/or Content.

Mondaq reserves the right, in its sole discretion, to take any action that it deems necessary and appropriate in the event it considers that there is a breach or threatened breach of the Terms.

Mondaq’s Rights and Obligations

Unless otherwise expressly set out to the contrary, nothing in these Terms shall serve to transfer from Mondaq to you, any Intellectual Property Rights owned by and/or licensed to Mondaq and all rights, title and interest in and to such Intellectual Property Rights will remain exclusively with Mondaq and/or its licensors.

Mondaq shall use its reasonable endeavours to make the Website and Services available to you at all times, but we cannot guarantee an uninterrupted and fault free service.

Mondaq reserves the right to make changes to the services and/or the Website or part thereof, from time to time, and we may add, remove, modify and/or vary any elements of features and functionalities of the Website or the services.

Mondaq also reserves the right from time to time to monitor your Use of the Website and/or services.


The Content is general information only. It is not intended to constitute legal advice or seek to be the complete and comprehensive statement of the law, nor is it intended to address your specific requirements or provide advice on which reliance should be placed. Mondaq and/or its Contributors and other suppliers make no representations about the suitability of the information contained in the Content for any purpose. All Content provided "as is" without warranty of any kind. Mondaq and/or its Contributors and other suppliers hereby exclude and disclaim all representations, warranties or guarantees with regard to the Content, including all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement. To the maximum extent permitted by law, Mondaq expressly excludes all representations, warranties, obligations, and liabilities arising out of or in connection with all Content. In no event shall Mondaq and/or its respective suppliers be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use of the Content or performance of Mondaq’s Services.


Mondaq may alter or amend these Terms by amending them on the Website. By continuing to Use the Services and/or the Website after such amendment, you will be deemed to have accepted any amendment to these Terms.

These Terms shall be governed by and construed in accordance with the laws of England and Wales and you irrevocably submit to the exclusive jurisdiction of the courts of England and Wales to settle any dispute which may arise out of or in connection with these Terms. If you live outside the United Kingdom, English law shall apply only to the extent that English law shall not deprive you of any legal protection accorded in accordance with the law of the place where you are habitually resident ("Local Law"). In the event English law deprives you of any legal protection which is accorded to you under Local Law, then these terms shall be governed by Local Law and any dispute or claim arising out of or in connection with these Terms shall be subject to the non-exclusive jurisdiction of the courts where you are habitually resident.

You may print and keep a copy of these Terms, which form the entire agreement between you and Mondaq and supersede any other communications or advertising in respect of the Service and/or the Website.

No delay in exercising or non-exercise by you and/or Mondaq of any of its rights under or in connection with these Terms shall operate as a waiver or release of each of your or Mondaq’s right. Rather, any such waiver or release must be specifically granted in writing signed by the party granting it.

If any part of these Terms is held unenforceable, that part shall be enforced to the maximum extent permissible so as to give effect to the intent of the parties, and the Terms shall continue in full force and effect.

Mondaq shall not incur any liability to you on account of any loss or damage resulting from any delay or failure to perform all or any part of these Terms if such delay or failure is caused, in whole or in part, by events, occurrences, or causes beyond the control of Mondaq. Such events, occurrences or causes will include, without limitation, acts of God, strikes, lockouts, server and network failure, riots, acts of war, earthquakes, fire and explosions.

By clicking Register you state you have read and agree to our Terms and Conditions