United States: What The FDA Has In Store For The Food Industry In 2017

As L ife Sciences Decoded looks forward in 2017, it is clear that FDA-regulated industries have a great deal of change confronting them. Last year, 2016, was a landmark year for the FDA and food regulations, as the agency finalized and began enforcing four of the major Rules promulgated under the 2011 Food Safety Modernization Act (FSMA). These include Hazard Analysis and Risk-based Preventive Controls (HARPC), the Produce Safety Rule, the Sanitary Transport Rule, and the Foreign Supplier Verification Program (FSVP). These Rules, along with several others and in-progress Guidance documents, represent the practical application of the FSMA, what is expected of the food industry and the first major overhaul of the U.S. food safety system in more than 70 years.

These programs have been discussed at length by Life Sciences Decoded and represent a new vision for how a food facility must implement a food safety plan to prevent the adulteration of food for both humans and animals. These four Rules all have triggers for compliance in 2017 which will affect how the food industry does business going forward.

The following is a brief description of these Rules with their respective compliance dates and the impending 2017 implications. It is worth noting that some of these Rules have already been extended (see those with an *) and may be extended again. Those dates that have already past or appear in 2017 are in bold.

Current Good Manufacturing Practices (GMPs) and Hazard Analysis and Risk-based Preventive Controls (HARPC) for Human Foods

This is the core of the FSMA's impact for most members of the food industry that are involved with processing foods. HARPC requires a food facility to have in place a Food Safety Plan that addresses, in detail, the hazards present in the facility, its processes and equipment that could result in the adulteration of the foods handled in the facility. A HARPC-compliant food safety plan requires facilities to perform a full analysis of every component of their manufacturing, packaging, labelling, holding and other processing activities, identify the hazards these activities pose, create preventive controls to minimize the risks these hazards pose, and create corrective actions in the case that these hazards impact the food (including recalls, market withdrawals and reprocessing). HARPC requires this entire process to be documented, and employees must be thoroughly trained on the new food safety plan when it is implemented. Finally, the GMPs that have applied to human food for decades have been updated with a new emphasis on hygiene, training and allergen cross-contact prevention.

  • Location: 21 C.F.R. § 117
  • Rule Date: September 30, 2015
  • Compliance date for most businesses:
    • September 19, 2016
    • Supply Chain Program - March 17, 2017
  • Compliance date for small businesses: September 18, 2019*

Impact in 2017: The Supply Chain Program will have the greatest impact on food businesses and the evaluation of the industry's intra-company manufacturing processes, as well as its relationship with its suppliers and customers in 2017. To implement this supply chain requirement, not only will the industry need to better track both inbound and outbound product, but it is intended to create better communication and a continuous vigilance on food safety.  These supply chain programs should be written and must be integrated into the food safety plan and should be consistent with the inbound and outbound providers of products plans as well. The regulatory requirements are detailed in its requirements and those requirements must be accounted for including, but not limited to audits, records keeping and other verification activities.

Current Good Manufacturing Practices (GMPs) and Hazard Analysis and Risk-based Preventive Controls (HARPC) for Animal Foods

This is essentially HARPC for facilities that process animal feeds. However, new to animal feed production are GMPs that also govern product handling and production. Historically, animal feed manufacturing has not been subject to GMP regulation, and now with the passing of this Rule, animal feeds are subject to nearly the same amount of safety regulation that human foods are.

  • Location: 21 C.F.R. § 507
  • Rule Date: September 30, 2015
  • Compliance date for most businesses:
    • September 18, 2017
  • Compliance date for small businesses:
    • September 17, 2018*

Impact in 2017:  All animal food/feed will have to be manufactured in accordance with GMPs and are now required to have in place a HARPC plan. Animal food/feed companies are now being held to a much higher level of compliance than ever before. These new regulations will change the way animal food/feed companies process/manufacture and generally do business. These companies must develop written food safety plans and in so doing must evaluate the manufacturing process it utilizes to ensure not only that the manufactured product meets GMPs but must account for hazards and hazard controls.

Produce Safety Rule

Whereas HARPC does not apply to farms, the new Produce Safety Rule does apply to many farming facilities throughout the U.S., particularly those involved in the growing and harvesting of raw agricultural commodities that are consumed raw such as sprouts. The new Rule is expansive, and covers everything from the buildings, storage facilities, employee restrooms, worker training, wildlife and even a farm's water source. Do note that there are many crops that are exempt from the rule because they are rarely consumed raw (such as coffee beans).

  • Location: 21 C.F.R. § 112
  • Rule Date: October 31, 2015
  • Compliance date for most businesses:
    • January 27, 2020*
    • Compliance dates for small businesses and very small businesses: January 26, 2021 and January 26, 2022.*
  • Compliance date for businesses involving sprouts:
    • January 28, 2019*
  • Compliance dates for small and very small businesses involving sprouts:
    • January 27, 2020 and January 26, 2021.*

Impact for 2017: In spite of the fact that the compliance dates are after 2017, the produce industry as defined under this rule, has never been subject to this level of regulation. Therefore, 2017 is a year in which the produce industry needs to begin to prepare itself to comply with the lengthy and detailed regulatory requirements. These new regulations include sanitary measures, equipment safety, facilities and grounds, as well as an increased focus on managing biological sources of contamination. For an industry experiencing these FDA regulations for the first time, 2017 is the time to begin conforming business practices.

Foreign Supplier Verification Program

The new Foreign Supplier Verification Program is designed to ensure that not only is food manufactured and processed in the US safe, under HARPC and the Produce Safety Rule, but also those food products made overseas and brought into the U.S. This program in part recruits U.S. entities to work on behalf of the FDA to police foreign suppliers of food products to make sure that HARPC's new more stringent requirements are not just followed domestically.

  • Location: 21 C.F.R. § 1.500 et seq.
  • Rule Date: October 31, 2015
  • Compliance Date: May 28, 2019*

Impact for 2017: The compliance date for the FSVP is somewhat misleading as domestic food companies are currently required to have a safe food supply. For those companies sourcing from outside the U.S., once the product is in the U.S., the domestic importer is solely at risk without the benefit of ensuring that the foreign supplier has been inspected and has an appropriate food safety plan until such time as this rule becomes effective. Therefore, verifying a foreign supplier's practices now makes a great deal of sense for all domestic food businesses.

Sanitary Transport Rule

The Sanitary Transport Rule dictates a new set of procedures for documenting the movement of food through the U.S. via rail or motor vehicle. Anyone who participates in a "transportation operation," including anything that impacts the sanitary condition of food in transportation such as cleaning, inspection, loading, unloading, receiving, etc. Note, this rule does not apply to transportation via air or water.

  • Location: 21 C.F.R. § 1.900 et seq
  • Rule Date: April 6, 2016
  • Compliance date for most businesses: April 6, 2017
  • Compliance date for small businesses: April 6, 2018

Impact for 2017: This rule brings the transport industry into the safe food equation. The domestic food industry will be responsible (unless delegated through a transport agreement) to ensure that the food it is having transported is transported under the same safety standards in which it was manufactured. Records will need to be kept on cleaning transport by vehicles, inspections of those vehicles and preventing cross contamination, particularly with known allergens. Trucking and rail industries are not familiar with FDA and its regulations, and therefore educating these transport industries is likely to fall on the food industry itself.

The FSMA's regulations are not the only ones which will be impacting the food industry this year. In addition to the Rules described above, the FDA will also be enforcing the following.

Vending Machine Nutrition Labeling

The new rule requires operators of vending machines to enable the disclosure of caloric content information for products sold in vending machines. Derived from the Patient Protection and Affordable Care Act, this rule's compliance date in 2017 requires significant amount of coordination between snack and food manufacturers and vending machine companies to ensure compliance. The FDA has not required labeling for vending machines previously, and many aging vending machines lack the technology or shelf space to accommodate the new rule. Additionally, vending machine operators will need to re-think machine-stocking procedures and retrain employees.

  • Location: 21 C.F.R. § 101.8
  • Rule Date: December 1, 2014

While the original compliance date for the Rule was December 1, 2016, the FDA has stated that, consistent with a clause entered into the 2016 Omnibus Bill passed by Congress, the FDA will not be enforcing the rule until May 5, 2017. Glass-front vending machines with foods that have labelling on the front of their packages, which is visible from the outside of the machine, have a compliance date of July 26, 2018. However, Life Sciences Decoded encourages members of the industry to ensure compliance as quickly as possible, as this may change.

Nutrition Labeling of Menu Items in Restaurants

Restaurants that are part of a chain of 20 or more locations, doing business under the same name, offering for sale substantially the same menu items and offering for sale restaurant-type foods: This new Rule will require the disclosure of calorie information for menu items on menus, but restaurants subject to the rule will also need to have available to the customer, upon request, additional nutrition information similar to that found on the Nutrition Facts panel of packaged foods.

  • Location: 21 C.F.R. § 101.11
  • Rule Date: May 5, 2016
  • Compliance Date: December 1, 2016 was the original compliance date. However, on December 2, 2016, the FDA announced that it would extend this compliance date to May 5, 2017.

Compliance dates that have either already passed or are soon approaching, enforcement can be expected.  This means more inspections. Additionally, inspectors will be expecting to see ongoing evidence of efforts toward compliance before final compliance dates arrive for those rules with future compliance dates.

While rules with compliance dates that have already passed should be a priority for all involved, small businesses with dates that are farther out should take the opportunity in 2017 to begin the process of building their compliance programs to not only address these issues before the required date, but also to reflect how these regulations are enforced on larger companies subject to earlier compliance dates. As usual, getting an early start on these programs, particularly for companies with limited resources, will be key to ensuring that they are ready when the FDA first appears at their door for inspections aimed at the new food safety plans.


The FDA also continues to ramp up and support its training programs. Through the Produce Safety Alliance, the Foods Safety Preventive Controls Alliance, and the Sprout Safety Alliance, the FDA has created FDA-funded industry organizations that are in charge of "training the trainers" for food industry members. In other words, these alliances provide the training that can be used to train employees on food safety regulations and compliance under the FSMA as well. While these are not the only training options available, they will be the industry standard for the foreseeable future. With the approach of so many FSMA and other food safety deadlines quickly approaching, all members of the food industry will be looking to these, and similar FDA-recognized training organizations, for education in 2017.

The content of this article is intended to provide a general guide to the subject matter. Specialist advice should be sought about your specific circumstances.

To print this article, all you need is to be registered on Mondaq.com.

Click to Login as an existing user or Register so you can print this article.

In association with
Related Video
Up-coming Events Search
Font Size:
Mondaq on Twitter
Register for Access and our Free Biweekly Alert for
This service is completely free. Access 250,000 archived articles from 100+ countries and get a personalised email twice a week covering developments (and yes, our lawyers like to think you’ve read our Disclaimer).
Email Address
Company Name
Confirm Password
Mondaq Topics -- Select your Interests
 Law Performance
 Law Practice
 Media & IT
 Real Estate
 Wealth Mgt
Asia Pacific
European Union
Latin America
Middle East
United States
Worldwide Updates
Check to state you have read and
agree to our Terms and Conditions

Terms & Conditions and Privacy Statement

Mondaq.com (the Website) is owned and managed by Mondaq Ltd and as a user you are granted a non-exclusive, revocable license to access the Website under its terms and conditions of use. Your use of the Website constitutes your agreement to the following terms and conditions of use. Mondaq Ltd may terminate your use of the Website if you are in breach of these terms and conditions or if Mondaq Ltd decides to terminate your license of use for whatever reason.

Use of www.mondaq.com

You may use the Website but are required to register as a user if you wish to read the full text of the content and articles available (the Content). You may not modify, publish, transmit, transfer or sell, reproduce, create derivative works from, distribute, perform, link, display, or in any way exploit any of the Content, in whole or in part, except as expressly permitted in these terms & conditions or with the prior written consent of Mondaq Ltd. You may not use electronic or other means to extract details or information about Mondaq.com’s content, users or contributors in order to offer them any services or products which compete directly or indirectly with Mondaq Ltd’s services and products.


Mondaq Ltd and/or its respective suppliers make no representations about the suitability of the information contained in the documents and related graphics published on this server for any purpose. All such documents and related graphics are provided "as is" without warranty of any kind. Mondaq Ltd and/or its respective suppliers hereby disclaim all warranties and conditions with regard to this information, including all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement. In no event shall Mondaq Ltd and/or its respective suppliers be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of information available from this server.

The documents and related graphics published on this server could include technical inaccuracies or typographical errors. Changes are periodically added to the information herein. Mondaq Ltd and/or its respective suppliers may make improvements and/or changes in the product(s) and/or the program(s) described herein at any time.


Mondaq Ltd requires you to register and provide information that personally identifies you, including what sort of information you are interested in, for three primary purposes:

  • To allow you to personalize the Mondaq websites you are visiting.
  • To enable features such as password reminder, newsletter alerts, email a colleague, and linking from Mondaq (and its affiliate sites) to your website.
  • To produce demographic feedback for our information providers who provide information free for your use.

Mondaq (and its affiliate sites) do not sell or provide your details to third parties other than information providers. The reason we provide our information providers with this information is so that they can measure the response their articles are receiving and provide you with information about their products and services.

If you do not want us to provide your name and email address you may opt out by clicking here .

If you do not wish to receive any future announcements of products and services offered by Mondaq by clicking here .

Information Collection and Use

We require site users to register with Mondaq (and its affiliate sites) to view the free information on the site. We also collect information from our users at several different points on the websites: this is so that we can customise the sites according to individual usage, provide 'session-aware' functionality, and ensure that content is acquired and developed appropriately. This gives us an overall picture of our user profiles, which in turn shows to our Editorial Contributors the type of person they are reaching by posting articles on Mondaq (and its affiliate sites) – meaning more free content for registered users.

We are only able to provide the material on the Mondaq (and its affiliate sites) site free to site visitors because we can pass on information about the pages that users are viewing and the personal information users provide to us (e.g. email addresses) to reputable contributing firms such as law firms who author those pages. We do not sell or rent information to anyone else other than the authors of those pages, who may change from time to time. Should you wish us not to disclose your details to any of these parties, please tick the box above or tick the box marked "Opt out of Registration Information Disclosure" on the Your Profile page. We and our author organisations may only contact you via email or other means if you allow us to do so. Users can opt out of contact when they register on the site, or send an email to unsubscribe@mondaq.com with “no disclosure” in the subject heading

Mondaq News Alerts

In order to receive Mondaq News Alerts, users have to complete a separate registration form. This is a personalised service where users choose regions and topics of interest and we send it only to those users who have requested it. Users can stop receiving these Alerts by going to the Mondaq News Alerts page and deselecting all interest areas. In the same way users can amend their personal preferences to add or remove subject areas.


A cookie is a small text file written to a user’s hard drive that contains an identifying user number. The cookies do not contain any personal information about users. We use the cookie so users do not have to log in every time they use the service and the cookie will automatically expire if you do not visit the Mondaq website (or its affiliate sites) for 12 months. We also use the cookie to personalise a user's experience of the site (for example to show information specific to a user's region). As the Mondaq sites are fully personalised and cookies are essential to its core technology the site will function unpredictably with browsers that do not support cookies - or where cookies are disabled (in these circumstances we advise you to attempt to locate the information you require elsewhere on the web). However if you are concerned about the presence of a Mondaq cookie on your machine you can also choose to expire the cookie immediately (remove it) by selecting the 'Log Off' menu option as the last thing you do when you use the site.

Some of our business partners may use cookies on our site (for example, advertisers). However, we have no access to or control over these cookies and we are not aware of any at present that do so.

Log Files

We use IP addresses to analyse trends, administer the site, track movement, and gather broad demographic information for aggregate use. IP addresses are not linked to personally identifiable information.


This web site contains links to other sites. Please be aware that Mondaq (or its affiliate sites) are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of these third party sites. This privacy statement applies solely to information collected by this Web site.

Surveys & Contests

From time-to-time our site requests information from users via surveys or contests. Participation in these surveys or contests is completely voluntary and the user therefore has a choice whether or not to disclose any information requested. Information requested may include contact information (such as name and delivery address), and demographic information (such as postcode, age level). Contact information will be used to notify the winners and award prizes. Survey information will be used for purposes of monitoring or improving the functionality of the site.


If a user elects to use our referral service for informing a friend about our site, we ask them for the friend’s name and email address. Mondaq stores this information and may contact the friend to invite them to register with Mondaq, but they will not be contacted more than once. The friend may contact Mondaq to request the removal of this information from our database.


This website takes every reasonable precaution to protect our users’ information. When users submit sensitive information via the website, your information is protected using firewalls and other security technology. If you have any questions about the security at our website, you can send an email to webmaster@mondaq.com.

Correcting/Updating Personal Information

If a user’s personally identifiable information changes (such as postcode), or if a user no longer desires our service, we will endeavour to provide a way to correct, update or remove that user’s personal data provided to us. This can usually be done at the “Your Profile” page or by sending an email to EditorialAdvisor@mondaq.com.

Notification of Changes

If we decide to change our Terms & Conditions or Privacy Policy, we will post those changes on our site so our users are always aware of what information we collect, how we use it, and under what circumstances, if any, we disclose it. If at any point we decide to use personally identifiable information in a manner different from that stated at the time it was collected, we will notify users by way of an email. Users will have a choice as to whether or not we use their information in this different manner. We will use information in accordance with the privacy policy under which the information was collected.

How to contact Mondaq

You can contact us with comments or queries at enquiries@mondaq.com.

If for some reason you believe Mondaq Ltd. has not adhered to these principles, please notify us by e-mail at problems@mondaq.com and we will use commercially reasonable efforts to determine and correct the problem promptly.