UK: Design Liability Under The NEC Form Of Contract

Last Updated: 29 March 2017
Article by Mark Lloyd-Williams, Ann Levin, James Doe and David Nitek

In SSE Generation Limited v Hochtief Solutions AG and another decided on 21st December 2016, the Court of Session in Scotland considered a contractor's potential design liability under the NEC Form of Contract. It concluded that the contractor was not obliged to guarantee the performance of the works where Option M (X15) was adopted so that the contractor would not be liable for defects in the works due to his design so far as he proved that he used reasonable skill and care to ensure that it complied with the Works Information.

The court held that to impose strict liability on the contractor would effectively rob Option M of its meaning and make redundant some of the other provisions regarding repair and maintenance.

The court also considered important issues relating to mitigation of loss and expert evidence.

The Background

The case concerned the collapse of a tunnel in the Glendoe hydroelectrics scheme in Scotland. Rock material had fallen from a breach in the tunnel over several months, leading to a blockage.

The employer and contractor had entered into an NEC Option A contract on the basis of a lump sum fixed price. The contractor provided the methodology for excavation and rock support. After the collapse occurred, the employer brought in another contractor to carry out remedial works on the basis of an NEC Option E (Cost Reimbursable) Contract. This was subsequently converted to a Fixed Price Contract to limit the escalation in costs after finalisation of remedial design.

The defects had come to light after the employer had taken over the works. Such defects were at the employer's risk unless they were due to a defect which existed at takeover. A defect is defined as part of the works which is not in accordance with the Works Information. The employer contended that the requirement in the Works Information to "provide reliable service without requirement for major refurbishment or significant capital expenditure" indicated that the contractor's design must ensure the requisite level of support to prevent the erosion of erodible rock during operation.

However, the contractor relied on Option M within the NEC contract (X15 in the standard form) which said that the contractor was not liable for defects in the works due to his design so far as he proved that he used reasonable skill and care to ensure that it complied with the Works Information.

The Decision on Liability

The court held that Option M could not be interpreted as a guarantee of the works by the contractor. The "familiar and lesser" obligation of reasonable skill and care was the test. If the employer was correct, this would impose an overarching obligation of fitness for purpose and therefore strict liability on the contractor and rob Option M of its meaning.

The court also held that the overwhelming weight of the contractual provisions called for the exercise of engineering judgement in considering the tunnel support methodology. Isolated provisions which might indicate mandatory levels of support by requiring erodible rock to be shotcreted (by using sprayed concrete rather than leaving the tunnel unlined) did not impose a strict duty on the contractor. It had to exercise judgement in considering the integrity of the tunnel and assess the presence of any erodible material.

The employer's approach to liability was criticised as relying on hindsight and overlooking the collaborative approach to the design process. This had led to the approach to rock classification and support being agreed, making sure that the employer only paid for necessary support.

Mitigation of Loss

The court also considered the position, had it been wrong on liability. The contractor maintained that the employer had failed to mitigate its loss. However, the court relied on the case of Banco de Portugal (1932) where it was held that the duty on a party adopting remedial measures for breach of contract was to act reasonably in the adoption of such measures. If it did, there could be no criticism, merely because the party in breach could suggest that other measures less burdensome to him could be taken.

The court analysed the progress of the remedial works. Initially, these had been carried out on an NEC option E contract, providing for a cost reimbursable approach. The court did not criticise this approach, noting that the employer had to act quickly to recover its assets. It had also acted on the advice of its professional consultants and the remedial works contractor was only prepared to contract on the basis of Option E.

The remedial costs were monitored on an "exacting" basis and it was not appropriate to compare the price of the original works with those of the recovery project. The court concluded that Option E was the only appropriate model for the recovery project. Indeed, the original contractor had itself proposed to carry out the remedial works on that basis.

Expert evidence

The court also noted the usefulness of adopting a concurrent evidence or "hot-tubbing" approach to the hearing of expert evidence. This had been adopted for the tunnelling evidence and the court described it as "an extremely valuable exercise and one which [the judge] would repeat in suitable future cases". Instead of hearing complex testimony weeks apart, the court said that it was able to hear the different opinions at one and the same time and the experts were also able to challenge one another's position which bought the topics into sharp focus. The experts rose to the challenge by providing crisp answers.


The issue of whether a contract provides for the exercise of reasonable skill and care in design or ensuring fitness for purpose has been regularly considered by the courts and, at present, the Højgaard case on this point is pending before the Supreme Court.

The issue here was not dissimilar to Højgaard. There were certain contractual provisions which might (in the court's view somewhat tenuously) indicate that a fitness for purpose obligation was applicable but, looking at the contract as a whole, and the "overwhelming weight" of the contractual provisions, the court concluded that they called for the exercise of engineering judgement. Taken as a whole, the effect of the contract precluded the mandatory requirement that the employer contended for.

The content of this article is intended to provide a general guide to the subject matter. Specialist advice should be sought about your specific circumstances.

To print this article, all you need is to be registered on

Click to Login as an existing user or Register so you can print this article.

In association with
Related Video
Up-coming Events Search
Font Size:
Mondaq on Twitter
Register for Access and our Free Biweekly Alert for
This service is completely free. Access 250,000 archived articles from 100+ countries and get a personalised email twice a week covering developments (and yes, our lawyers like to think you’ve read our Disclaimer).
Email Address
Company Name
Confirm Password
Mondaq Topics -- Select your Interests
 Law Performance
 Law Practice
 Media & IT
 Real Estate
 Wealth Mgt
Asia Pacific
European Union
Latin America
Middle East
United States
Worldwide Updates
Check to state you have read and
agree to our Terms and Conditions

Terms & Conditions and Privacy Statement (the Website) is owned and managed by Mondaq Ltd and as a user you are granted a non-exclusive, revocable license to access the Website under its terms and conditions of use. Your use of the Website constitutes your agreement to the following terms and conditions of use. Mondaq Ltd may terminate your use of the Website if you are in breach of these terms and conditions or if Mondaq Ltd decides to terminate your license of use for whatever reason.

Use of

You may use the Website but are required to register as a user if you wish to read the full text of the content and articles available (the Content). You may not modify, publish, transmit, transfer or sell, reproduce, create derivative works from, distribute, perform, link, display, or in any way exploit any of the Content, in whole or in part, except as expressly permitted in these terms & conditions or with the prior written consent of Mondaq Ltd. You may not use electronic or other means to extract details or information about’s content, users or contributors in order to offer them any services or products which compete directly or indirectly with Mondaq Ltd’s services and products.


Mondaq Ltd and/or its respective suppliers make no representations about the suitability of the information contained in the documents and related graphics published on this server for any purpose. All such documents and related graphics are provided "as is" without warranty of any kind. Mondaq Ltd and/or its respective suppliers hereby disclaim all warranties and conditions with regard to this information, including all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement. In no event shall Mondaq Ltd and/or its respective suppliers be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of information available from this server.

The documents and related graphics published on this server could include technical inaccuracies or typographical errors. Changes are periodically added to the information herein. Mondaq Ltd and/or its respective suppliers may make improvements and/or changes in the product(s) and/or the program(s) described herein at any time.


Mondaq Ltd requires you to register and provide information that personally identifies you, including what sort of information you are interested in, for three primary purposes:

  • To allow you to personalize the Mondaq websites you are visiting.
  • To enable features such as password reminder, newsletter alerts, email a colleague, and linking from Mondaq (and its affiliate sites) to your website.
  • To produce demographic feedback for our information providers who provide information free for your use.

Mondaq (and its affiliate sites) do not sell or provide your details to third parties other than information providers. The reason we provide our information providers with this information is so that they can measure the response their articles are receiving and provide you with information about their products and services.

If you do not want us to provide your name and email address you may opt out by clicking here .

If you do not wish to receive any future announcements of products and services offered by Mondaq by clicking here .

Information Collection and Use

We require site users to register with Mondaq (and its affiliate sites) to view the free information on the site. We also collect information from our users at several different points on the websites: this is so that we can customise the sites according to individual usage, provide 'session-aware' functionality, and ensure that content is acquired and developed appropriately. This gives us an overall picture of our user profiles, which in turn shows to our Editorial Contributors the type of person they are reaching by posting articles on Mondaq (and its affiliate sites) – meaning more free content for registered users.

We are only able to provide the material on the Mondaq (and its affiliate sites) site free to site visitors because we can pass on information about the pages that users are viewing and the personal information users provide to us (e.g. email addresses) to reputable contributing firms such as law firms who author those pages. We do not sell or rent information to anyone else other than the authors of those pages, who may change from time to time. Should you wish us not to disclose your details to any of these parties, please tick the box above or tick the box marked "Opt out of Registration Information Disclosure" on the Your Profile page. We and our author organisations may only contact you via email or other means if you allow us to do so. Users can opt out of contact when they register on the site, or send an email to with “no disclosure” in the subject heading

Mondaq News Alerts

In order to receive Mondaq News Alerts, users have to complete a separate registration form. This is a personalised service where users choose regions and topics of interest and we send it only to those users who have requested it. Users can stop receiving these Alerts by going to the Mondaq News Alerts page and deselecting all interest areas. In the same way users can amend their personal preferences to add or remove subject areas.


A cookie is a small text file written to a user’s hard drive that contains an identifying user number. The cookies do not contain any personal information about users. We use the cookie so users do not have to log in every time they use the service and the cookie will automatically expire if you do not visit the Mondaq website (or its affiliate sites) for 12 months. We also use the cookie to personalise a user's experience of the site (for example to show information specific to a user's region). As the Mondaq sites are fully personalised and cookies are essential to its core technology the site will function unpredictably with browsers that do not support cookies - or where cookies are disabled (in these circumstances we advise you to attempt to locate the information you require elsewhere on the web). However if you are concerned about the presence of a Mondaq cookie on your machine you can also choose to expire the cookie immediately (remove it) by selecting the 'Log Off' menu option as the last thing you do when you use the site.

Some of our business partners may use cookies on our site (for example, advertisers). However, we have no access to or control over these cookies and we are not aware of any at present that do so.

Log Files

We use IP addresses to analyse trends, administer the site, track movement, and gather broad demographic information for aggregate use. IP addresses are not linked to personally identifiable information.


This web site contains links to other sites. Please be aware that Mondaq (or its affiliate sites) are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of these third party sites. This privacy statement applies solely to information collected by this Web site.

Surveys & Contests

From time-to-time our site requests information from users via surveys or contests. Participation in these surveys or contests is completely voluntary and the user therefore has a choice whether or not to disclose any information requested. Information requested may include contact information (such as name and delivery address), and demographic information (such as postcode, age level). Contact information will be used to notify the winners and award prizes. Survey information will be used for purposes of monitoring or improving the functionality of the site.


If a user elects to use our referral service for informing a friend about our site, we ask them for the friend’s name and email address. Mondaq stores this information and may contact the friend to invite them to register with Mondaq, but they will not be contacted more than once. The friend may contact Mondaq to request the removal of this information from our database.


This website takes every reasonable precaution to protect our users’ information. When users submit sensitive information via the website, your information is protected using firewalls and other security technology. If you have any questions about the security at our website, you can send an email to

Correcting/Updating Personal Information

If a user’s personally identifiable information changes (such as postcode), or if a user no longer desires our service, we will endeavour to provide a way to correct, update or remove that user’s personal data provided to us. This can usually be done at the “Your Profile” page or by sending an email to

Notification of Changes

If we decide to change our Terms & Conditions or Privacy Policy, we will post those changes on our site so our users are always aware of what information we collect, how we use it, and under what circumstances, if any, we disclose it. If at any point we decide to use personally identifiable information in a manner different from that stated at the time it was collected, we will notify users by way of an email. Users will have a choice as to whether or not we use their information in this different manner. We will use information in accordance with the privacy policy under which the information was collected.

How to contact Mondaq

You can contact us with comments or queries at

If for some reason you believe Mondaq Ltd. has not adhered to these principles, please notify us by e-mail at and we will use commercially reasonable efforts to determine and correct the problem promptly.