Canada: Canada Publishes Bail-In Regulations

In this Update

  • On June 16, 2017, the Canadian federal government published its draft bail-in regulations for public comment
  • Office of Superintendent of Financial Institutions published its draft total loss absorbing capacity guideline for public comment
  • Key takeaways
  • Overview of proposed bail-in process
  • Potential tax implications

Background

The 2008 global financial crisis has led a number of governments (especially members of G20) to pass financial regulations over the last few years as part of their reform agenda. An important part of this agenda is to address the potential risks to the financial system and broad economy of institutions perceived as "too big to fail." One of the tools adopted by the G20 members to address this risk is "bail-in" – i.e., the power for domestic authorities to convert some of a failed bank's debt into equity to recapitalize the bank, absorb losses, and help restore it to viability without relying on government bailouts.

Canada, as an active participant in the G20's financial reform agenda, had previously announced its intention to adopt regulations to implement a bail-in regime and apply it to Canada's domestic systemically important (D-SIB) banks (Canada's six largest banks were named as systemically important by the Office of the Superintendent of Financial Institutions (OSFI) in 2013).

In 2014, the Canadian government issued a consultation paper announcing its intention to implement a bail-in regime in Canada. In its 2016 budget, the Canadian government announced a legislative framework for the bail-in regime via amendments to the Bank Act and Canada Deposit Insurance Corporation Act (CDIC Act) (see our May 2016 Osler Update which discusses the bail-in regime). Although the 2016 amendments to the Bank Act and CDIC Act established the bail-in legislative framework, they left the details of the bail-in regime to be implemented through regulations. 

On June 16, 2017, the Canadian federal government published its bail-in regulations for comments. In connection with this publication (and also on June 16), the OSFI released for comment a draft guideline on Total Loss Absorbing Capacity (TLAC). OSFI's draft guideline will apply to D-SIBs as part of the federal government's bail-in regime and will require D-SIBs to maintain sufficient TLAC (i.e., capital plus debt convertible into equity under the recapitalization regime) in line with internationally established TLAC standards.

Proposed bail-in regulations

The bail-in regulations are divided into three separate regulations:

  • Under the CDIC Act, the proposed Bank Recapitalization (Bail-in) Conversion Regulations (the Bail-in Scope and Conversion Regulations) set out the scope of liabilities of D-SIBs that would be eligible for a bail-in conversion and conversion terms if a bail-in were to be executed.
  • Under the Bank Act, the proposed Bank Recapitalization (Bail-in) Issuance Regulations (the Bail-in Issuance Regulations) set out requirements that D-SIBs would have to follow when issuing bail-in eligible securities.
  • Under the CDIC Act, the proposed Compensation Regulations set out an updated process for providing compensation to shareholders and creditors if they are  made worse off as a result of CDIC's actions to resolve the institution (including through bail-in) than they would have been if the institution were liquidated.

The Bail-in Scope and Conversion Regulations and the Bail-in Issuance Regulations apply only to D-SIBs; however, the Compensation Regulations apply to all CDIC federal member institutions.

Key takeaways

When compared to the government's previously announced guidance on Canada's bail-in regime, the proposed regulations do not contain any surprises. However, the following points are particularly noteworthy:

  • Not retroactive:  The bail-in power would not be retroactive. The proposed regulations would apply only to instruments that are issued, or amended to increase their principal value or extend their term, after the regulations come into force.
  • Scope: The scope for the bail-in power is consistent with the government's 2014 consultation paper on a proposed bail-in regime: namely, long-term (400 or more days), unsecured senior debt that is tradable and transferable. All newly issued instruments that have these features would be eligible for a bail-in conversion. An instrument is considered tradable and transferable if it has a Committee on Uniform Securities Identification Procedures (CUSIP) number, International Securities Identification Number (ISIN) or other similar identification.
  • TLAC guideline and terms of bail-in liabilities: OSFI's TLAC guideline sets out a number of eligibility criteria that must be met for bail-in debt to qualify under the TLAC guideline (e.g., restrictions on acceleration rights, restrictions on redemption rights, etc.). Although the proposed regulations do not directly touch on these points, as a practical matter, we expect that any bail-in debt issued by banks would have to meet the requirements of TLAC guideline.
  • Exclusions: The bail-in regime does not apply to deposits (e.g. chequing accounts, savings accounts and Guaranteed Investment Certificates), secured liabilities (e.g. covered bonds), eligible financial contracts (e.g. derivatives) or structured notes.  Structured notes are debt obligations whose returns may be based on, among other things, the performance of equity indexes, a single equity security, a basket of equity securities, interest rates, commodities, and/or foreign currencies.
  • Conversion: The proposed regulations do not include a fixed conversion multiplier. Instead, they provide CDIC with discretion to determine the conversion rate within the parameters set out in the proposed regulations. This discretion is intended to (i) provide flexibility for CDIC to set appropriate conversion terms based on the circumstances, (ii) mitigate concerns related to arbitrage trading, and (iii) be more consistent with approaches to bail-in taken in other jurisdictions (e.g. the United States, Switzerland and the European Union).  The parameters relating to conversion include the following:

    • Adequate recapitalization — CDIC must take into consideration the requirement in the Bank Act for banks to maintain adequate capital.
    • Order of conversion — bail-in eligible instruments can be converted only after all subordinate ranking bail-in eligible instruments and non-viability contingent capital (NVCC) have been converted.
    • Treatment of equally ranking instruments — equally ranking bail-in eligible instruments must be converted in the same proportion (pro rata) and receive the same number of common shares per dollar of the claim that is converted.
    • Relative creditor hierarchy — holders of bail-in eligible instruments must receive more common shares per dollar of the claim that is converted than holders of subordinate ranking bail-in eligible instruments and NVCC that have been converted.

The government has indicated that the Governor in Council and CDIC would also be able to ensure that senior bail-in debt holders are better off than holders of legacy capital instruments (i.e., those that are not NVCC and which would not be eligible for conversion under the bail-in power). For example, resolution actions could result in holders of legacy capital instruments incurring losses where those instruments are vested in CDIC by the Governor in Council under the CDIC Act.

  • Contractual terms: To facilitate enforceability of the bail-in power, shares and liabilities within the scope of bail-in must indicate in their contractual terms that the holder of the instrument is bound by the application of the CDIC Act, including the conversion of the instrument into common shares under the bail-in power. These new contractual terms must be governed by Canadian law, even where the rest of the contract is governed by foreign law.
  • Disclosure to investors: The proposed regulations require disclosure to investors that an instrument is eligible for a bail-in conversion in the prospectus or other relevant offering or disclosure document.
  • Possible inclusion of certain preferred shares and subordinated debt: Newly issued preferred shares and subordinated debt would also be eligible for bail-in, if they are not NVCC. We do not expect that such instruments would ordinarily be issued given that banks would not obtain capital treatment for such instruments. NVCC instruments are not included in the bail-in scope because they are already convertible into common shares under their terms.
  • Effective date: The proposed Bail-in Scope and Conversion Regulations and Bail-in Issuance Regulations would come into force 180 days after the day on which they are registered (we expect these regulations to be registered before the end of 2017). The proposed Compensation Regulations are drafted to come into force on January 1, 2018, but if they are registered after that day, they would come into force on the day on which they are registered.

Bail-in process

Based on the proposed regulations, the bail-in process for a non-viable bank can be summarized as follows:

  • Determination by Superintendent and Governor in Council approval: The use of the bail-in conversion tool would require (i) a determination by the Superintendent of Financial Institutions (Superintendent) that the bank has ceased, or is about to cease, to be viable, and (ii) Governor in Council approval, on the recommendation of the Minister of Finance, for CDIC to take temporary control or ownership of the non-viable bank and carry out a bail-in conversion.
  • CDIC taking control: CDIC would take temporary control or ownership of the non-viable bank. CDIC would execute a bail-in conversion to recapitalize the bank, and undertake any other restructuring measures necessary to restore the bank to viability (e.g. selling off troubled assets or subsidiaries).
  • Return to private control: After the completion of the bail-in conversion and other necessary restructuring measures, CDIC would return the bank to private control. The return to private control must happen within one year, although the Governor in Council may extend this time frame up to a maximum total period of five years.
  • Offer of compensation: Following the resolution, CDIC would make an offer of compensation to the relevant shareholders and creditors, if they have been made worse off as a result of CDIC's actions than they would have been if the institution had been liquidated. CDIC's offer would be reviewed by a third-party assessor that is appointed by the Governor in Council if persons who hold 10% of the value of a given class of shares or debt object to CDIC's offer. The assessor's own determination of compensation owed would be final and conclusive. The appointed third-party assessor is required to be a federal judge.

TLAC guideline

  • Background: Upon its coming into force, subsection 485(1.1) of the Bank Act will require D-SIBs to maintain a minimum capacity to absorb losses. The purpose of the TLAC requirement is to provide a non-viable D-SIB with sufficient loss absorbing capacity to support its recapitalization. In connection with the TLAC requirements, the Superintendent will establish two minimum standards: (i) the risk-based TLAC ratio, which builds on the risk-based capital ratios described in the OSFI's Capital Adequacy Requirement (CAR) guideline; and (ii) the TLAC Leverage Ratio, which builds on the Basel III Leverage Ratio described in OSFI's Leverage Requirements guideline.
  • Effective date: Beginning in fiscal Q1-2022 (i.e., November 1, 2021), D-SIBs will be expected to maintain a minimum risk-based TLAC ratio of at least 21.5% of risk-weighted assets and a minimum TLAC Leverage ratio of at least 6.75%. The Superintendent may subsequently vary the minimum TLAC requirements for individual D-SIBs or groups of D-SIBs. D-SIBs will also be expected to hold buffers above the minimum TLAC ratios.
  • Composition of TLAC:  The following are eligible to be recognized as TLAC:

    • Tier 1 capital, consisting of:

      • Common Equity Tier 1 capital;
      • Additional Tier 1 capital;
    • Tier 2 capital; and
    • prescribed shares and liabilities (Other TLAC Instruments) that are subject to conversion – in whole or in part – into common shares under the CDIC Act and meet all of the eligibility criteria set out in this guideline.
  • Eligibility criteria for Tier 1 and Tier 2:  The criteria for the capital elements comprising Tier 1 and Tier 2 capital, as well as the various limits, restrictions and regulatory adjustments to which they are subject, are described in OSFI's CAR guideline.
  • Eligibility Criteria for Other TLAC Instruments:   The criteria for Other TLAC Instruments to qualify as TLAC include the following:

    • The instrument is subject to a permanent conversion under the CDIC Act (where the instrument is governed by foreign laws, the D-SIB should provide evidence that there are no impediments to the application of Canadian statutory bail-in powers under the foreign law or within the terms of the instrument).
    • The instrument is directly issued by the Canadian parent bank (indirect issuances by subsidiaries or through special purpose vehicles will not be eligible as TLAC).
    • The instrument satisfies all of the requirements set out in the Bail-in Issuance Regulations.
    • The instrument must be issued and paid for in cash or, with the prior approval of the Superintendent, in property.
    • Neither the institution nor a related party over which the institution exercises control or significant influence can have purchased the instrument, nor can the institution directly or indirectly have funded the purchase of the instrument.
    • The instrument is neither fully secured at the time of issuance nor covered by a guarantee of the issuer or related party or other arrangement that legally or economically enhances the seniority of the claim vis-à-vis the institution's depositors and/or other general creditors.
    • The instrument is not subject to set-off or netting rights.
    • Except as provided below, the instrument must not provide the holder with rights to accelerate repayment of principal or interest payments outside of bankruptcy, insolvency, wind-up or liquidation. Events of default relating to the non-payment of scheduled principal and/or interest payments will be permitted where they are subject to a cure period of no less than 30 business days and clearly disclose to investors that: (i) acceleration is only permitted where an order has not been made pursuant to subsection 39.13(1) of the CDIC Act in respect of the institution; and that (ii) notwithstanding any acceleration, the instrument continues to be subject to bail-in prior to its repayment.
    • The instrument is perpetual or has a residual maturity in excess of 365 days (where the instrument has a step-up or other incentive to redeem, the instrument is deemed to mature on the date on which the incentive to redeem becomes effective. For such instruments, the residual maturity would be measured with reference to the effective date of the incentive to redeem rather than the contractual maturity date).
    • The instrument can be called or purchased for cancellation at the initiative of the issuer only and, where the redemption or purchase would lead to a breach of the D-SIB's minimum TLAC requirements, with the prior approval of the Superintendent.
    • The instrument does not have credit-sensitive dividend or coupon features that are reset periodically based in whole or in part on the institution's credit standing.
    • Where an amendment or variance of the instrument's terms and conditions would affect its recognition as TLAC, such amendment or variance will only be permitted with the prior approval of the Superintendent.

Tax implications

The issuance of bail-in eligible instruments by banks may raise tax implications both for issuers and investors. These issues should be carefully considered in the context of structuring, issuing or purchasing such instruments.

Deadline for comments

The deadline for submitting comments on the draft bail-in regulations and the draft TLCA guideline is July 17, 2017.

The content of this article is intended to provide a general guide to the subject matter. Specialist advice should be sought about your specific circumstances.

To print this article, all you need is to be registered on Mondaq.com.

Click to Login as an existing user or Register so you can print this article.

Authors
 
In association with
Related Video
Up-coming Events Search
Tools
Print
Font Size:
Translation
Channels
Mondaq on Twitter
 
Register for Access and our Free Biweekly Alert for
This service is completely free. Access 250,000 archived articles from 100+ countries and get a personalised email twice a week covering developments (and yes, our lawyers like to think you’ve read our Disclaimer).
 
Email Address
Company Name
Password
Confirm Password
Position
Mondaq Topics -- Select your Interests
 Accounting
 Anti-trust
 Commercial
 Compliance
 Consumer
 Criminal
 Employment
 Energy
 Environment
 Family
 Finance
 Government
 Healthcare
 Immigration
 Insolvency
 Insurance
 International
 IP
 Law Performance
 Law Practice
 Litigation
 Media & IT
 Privacy
 Real Estate
 Strategy
 Tax
 Technology
 Transport
 Wealth Mgt
Regions
Africa
Asia
Asia Pacific
Australasia
Canada
Caribbean
Europe
European Union
Latin America
Middle East
U.K.
United States
Worldwide Updates
Check to state you have read and
agree to our Terms and Conditions

Terms & Conditions and Privacy Statement

Mondaq.com (the Website) is owned and managed by Mondaq Ltd and as a user you are granted a non-exclusive, revocable license to access the Website under its terms and conditions of use. Your use of the Website constitutes your agreement to the following terms and conditions of use. Mondaq Ltd may terminate your use of the Website if you are in breach of these terms and conditions or if Mondaq Ltd decides to terminate your license of use for whatever reason.

Use of www.mondaq.com

You may use the Website but are required to register as a user if you wish to read the full text of the content and articles available (the Content). You may not modify, publish, transmit, transfer or sell, reproduce, create derivative works from, distribute, perform, link, display, or in any way exploit any of the Content, in whole or in part, except as expressly permitted in these terms & conditions or with the prior written consent of Mondaq Ltd. You may not use electronic or other means to extract details or information about Mondaq.com’s content, users or contributors in order to offer them any services or products which compete directly or indirectly with Mondaq Ltd’s services and products.

Disclaimer

Mondaq Ltd and/or its respective suppliers make no representations about the suitability of the information contained in the documents and related graphics published on this server for any purpose. All such documents and related graphics are provided "as is" without warranty of any kind. Mondaq Ltd and/or its respective suppliers hereby disclaim all warranties and conditions with regard to this information, including all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement. In no event shall Mondaq Ltd and/or its respective suppliers be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of information available from this server.

The documents and related graphics published on this server could include technical inaccuracies or typographical errors. Changes are periodically added to the information herein. Mondaq Ltd and/or its respective suppliers may make improvements and/or changes in the product(s) and/or the program(s) described herein at any time.

Registration

Mondaq Ltd requires you to register and provide information that personally identifies you, including what sort of information you are interested in, for three primary purposes:

  • To allow you to personalize the Mondaq websites you are visiting.
  • To enable features such as password reminder, newsletter alerts, email a colleague, and linking from Mondaq (and its affiliate sites) to your website.
  • To produce demographic feedback for our information providers who provide information free for your use.

Mondaq (and its affiliate sites) do not sell or provide your details to third parties other than information providers. The reason we provide our information providers with this information is so that they can measure the response their articles are receiving and provide you with information about their products and services.

If you do not want us to provide your name and email address you may opt out by clicking here .

If you do not wish to receive any future announcements of products and services offered by Mondaq by clicking here .

Information Collection and Use

We require site users to register with Mondaq (and its affiliate sites) to view the free information on the site. We also collect information from our users at several different points on the websites: this is so that we can customise the sites according to individual usage, provide 'session-aware' functionality, and ensure that content is acquired and developed appropriately. This gives us an overall picture of our user profiles, which in turn shows to our Editorial Contributors the type of person they are reaching by posting articles on Mondaq (and its affiliate sites) – meaning more free content for registered users.

We are only able to provide the material on the Mondaq (and its affiliate sites) site free to site visitors because we can pass on information about the pages that users are viewing and the personal information users provide to us (e.g. email addresses) to reputable contributing firms such as law firms who author those pages. We do not sell or rent information to anyone else other than the authors of those pages, who may change from time to time. Should you wish us not to disclose your details to any of these parties, please tick the box above or tick the box marked "Opt out of Registration Information Disclosure" on the Your Profile page. We and our author organisations may only contact you via email or other means if you allow us to do so. Users can opt out of contact when they register on the site, or send an email to unsubscribe@mondaq.com with “no disclosure” in the subject heading

Mondaq News Alerts

In order to receive Mondaq News Alerts, users have to complete a separate registration form. This is a personalised service where users choose regions and topics of interest and we send it only to those users who have requested it. Users can stop receiving these Alerts by going to the Mondaq News Alerts page and deselecting all interest areas. In the same way users can amend their personal preferences to add or remove subject areas.

Cookies

A cookie is a small text file written to a user’s hard drive that contains an identifying user number. The cookies do not contain any personal information about users. We use the cookie so users do not have to log in every time they use the service and the cookie will automatically expire if you do not visit the Mondaq website (or its affiliate sites) for 12 months. We also use the cookie to personalise a user's experience of the site (for example to show information specific to a user's region). As the Mondaq sites are fully personalised and cookies are essential to its core technology the site will function unpredictably with browsers that do not support cookies - or where cookies are disabled (in these circumstances we advise you to attempt to locate the information you require elsewhere on the web). However if you are concerned about the presence of a Mondaq cookie on your machine you can also choose to expire the cookie immediately (remove it) by selecting the 'Log Off' menu option as the last thing you do when you use the site.

Some of our business partners may use cookies on our site (for example, advertisers). However, we have no access to or control over these cookies and we are not aware of any at present that do so.

Log Files

We use IP addresses to analyse trends, administer the site, track movement, and gather broad demographic information for aggregate use. IP addresses are not linked to personally identifiable information.

Links

This web site contains links to other sites. Please be aware that Mondaq (or its affiliate sites) are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of these third party sites. This privacy statement applies solely to information collected by this Web site.

Surveys & Contests

From time-to-time our site requests information from users via surveys or contests. Participation in these surveys or contests is completely voluntary and the user therefore has a choice whether or not to disclose any information requested. Information requested may include contact information (such as name and delivery address), and demographic information (such as postcode, age level). Contact information will be used to notify the winners and award prizes. Survey information will be used for purposes of monitoring or improving the functionality of the site.

Mail-A-Friend

If a user elects to use our referral service for informing a friend about our site, we ask them for the friend’s name and email address. Mondaq stores this information and may contact the friend to invite them to register with Mondaq, but they will not be contacted more than once. The friend may contact Mondaq to request the removal of this information from our database.

Security

This website takes every reasonable precaution to protect our users’ information. When users submit sensitive information via the website, your information is protected using firewalls and other security technology. If you have any questions about the security at our website, you can send an email to webmaster@mondaq.com.

Correcting/Updating Personal Information

If a user’s personally identifiable information changes (such as postcode), or if a user no longer desires our service, we will endeavour to provide a way to correct, update or remove that user’s personal data provided to us. This can usually be done at the “Your Profile” page or by sending an email to EditorialAdvisor@mondaq.com.

Notification of Changes

If we decide to change our Terms & Conditions or Privacy Policy, we will post those changes on our site so our users are always aware of what information we collect, how we use it, and under what circumstances, if any, we disclose it. If at any point we decide to use personally identifiable information in a manner different from that stated at the time it was collected, we will notify users by way of an email. Users will have a choice as to whether or not we use their information in this different manner. We will use information in accordance with the privacy policy under which the information was collected.

How to contact Mondaq

You can contact us with comments or queries at enquiries@mondaq.com.

If for some reason you believe Mondaq Ltd. has not adhered to these principles, please notify us by e-mail at problems@mondaq.com and we will use commercially reasonable efforts to determine and correct the problem promptly.