ARTICLE
15 September 2018

Residential Focus – 12 September 2018: Part 1 - External combustible cladding

HR
Holding Redlich

Contributor

Holding Redlich, a national commercial law firm with offices in Melbourne, Canberra, Sydney, Brisbane, and Cairns, delivers tailored solutions with expert legal thinking and industry knowledge, prioritizing client partnerships.
Owners of buildings with external combustible cladding should begin collecting information to prepare for registration.
Australia Real Estate and Construction
To print this article, all you need is to be registered or login on Mondaq.com.

The 2017 fire at Grenfell Tower in London and the 2014 fire at the Lacrosse Building in Melbourne highlighted the risks associated with the use of combustible cladding products on high rise buildings. In response to the tragedies, the NSW Government has introduced new laws relating to buildings with combustible cladding. The latest of these, the Environmental Planning and Assessment Amendment (Identification of Buildings with Combustible Cladding) Regulation 2018 (Regulation) and State Environmental Planning Policy Amendment (Exempt Development – Cladding and Decorative Work) 2018 (Cladding SEPP), will commence on 22 October 2018.

The Regulation amends the Environmental Planning and Assessment Regulation 2000 to make a provision for the identification of, and collection of information about, buildings to which combustible cladding has been applied. While this objective mirrors that of the public consultation draft (Draft), which we discussed in an earlier edition, notable amendments have been made since the Draft and exist in the final Regulation.

External combustible cladding

The Draft was driven by the term "combustible cladding." This term has been replaced in the Regulation by the term "external combustible cladding" which means:

  • any cladding or cladding system comprising metal composite panels, including aluminium, zinc and copper, that is applied to any of the building's external walls or to any other external area of the building
  • any insulated cladding system, including a system comprising polystyrene, polyurethane or polyisocyanurate, that is applied to any of the building's external walls or to any other external area of the building.

This throws up a disconnect with the other key element in the NSW Government's legislative response to combustible cladding, the Building Products (Safety) Act 2017 (NSW) (the Act). Under the Act a banning order has been issued (the Banning Order) prohibiting the use of aluminium composite panels with a core comprised of more than 30 per cent polyethylene by mass in certain multi-storey buildings. For more information on the Banning Order, see our previous edition here.

Accordingly, whilst an owner of a building with external combustible cladding will be required to comply with the Regulation, the cladding may not necessarily be subject of an order to rectify, unless it is comprised of more than 30 per cent polyethylene by mass.

Obligations on owners under the Regulation

Under clause 186S of the Regulation, owners of certain buildings with external combustible cladding must register their building with the NSW Government through the NSW Planning Portal and provide information including:

  • a description of any external combustible cladding applied to the building, including the materials comprising the cladding
  • a description of the extent of application of external combustible cladding to the building and the parts of the building to which it is applied.

For buildings occupied before 22 October 2018, the deadline for registration is 22 February 2019. Owners of new buildings have been granted an additional month (in comparison to the timeline under the Draft) and will be required to register their buildings within four months of the building first being occupied.

The Regulation applies to the following building types of two or more storeys:

  • buildings containing two or more sole-occupancy units each being a separate dwelling, such as residential apartment buildings (class 2 building in the Building Code Australia)
  • residential buildings, which is a common place of long term or transient living for a number of unrelated persons, such as hotels and boarding houses (class 3 building in the Building Code Australia)
  • health care buildings, including those parts of the building set aside as laboratories and any associated single dwellings within the building (class 4 and 9a of the Building Code Australia)
  • assembly buildings, including a trade workshop, laboratory or the like, in a primary or secondary school and any associated single dwellings within the building (class 4 and 9b of the Building Code Australia)
  • aged care buildings and any associated single dwellings within the building (class 4 and 9c of the Building Code Australia).

This throws up another disconnect between the Regulation and the Banning Order as the types of buildings subject to the Banning Order are more extensive than those subject to the Regulation.

Under clause 186T a building owner may also be directed in writing, by specified authorities, to provide the Planning Secretary with details about the building.

Information provided to the NSW Government may be made publicly available on the register maintained by the Planning Secretary. This is in addition to any other information the Planning Secretary considers appropriate. This register will inevitably be searched by purchasers of buildings conducting due diligence. That may have a harsh impact on value, particularly for those buildings which are clad with aluminium composite panels with a core comprised of less than 30 per cent polyethylene by mass.

Under the Draft, it was proposed that owners of a building with combustible cladding would be required to have the building inspected by a properly qualified person and provide the Planning Secretary with a cladding statement. This requirement does not form part of the Regulation as passed.

The penalty for non-compliance with clause 186S remains at $1,500 for an individual and $3,000 for corporations. Similarly to the Draft, non-compliance with clause 186T will result in a penalty of $1,500 for an individual, however the penalty for corporations has increased to $6,000.

Referral of certain plans and specifications to NSW Fire Brigades

The Regulation also amends clause 144 to provide for the referral of certain plans and specifications to NSW Fire Brigades. This applies in certain cases where an alternative solution is proposed involving external combustible cladding and the alternative solution does not apply the verification method in the Building Code of Australia in its entirety. This is a new amendment that did not form part of the Draft.

State Environmental Planning Policies

The NSW Government has also amended eight State Environmental Planning Policies (SEPPs) concerning the approval process for new cladding, re-cladding and decorative work on buildings. The SEPPs that have been amended are:

  • State Environmental Planning Policy (Affordable Rental Housing) 2009
  • State Environmental Planning Policy (Kosciuszko National Park – Alpine Resorts) 2008
  • State Environmental Planning Policy (Exempt and Complying Development Codes) 2008 (Codes SEPP)
  • State Environmental Planning Policy (Educational Establishments and Child Care Facilities) 2017
  • State Environmental Planning Policy (Infrastructure) 2007
  • State Environmental Planning Policy (Mining, Petroleum Production and Extractive Industries) 2007
  • State Environmental Planning Policy (Three Ports) 2013
  • State Environmental Planning Policy (Western Sydney Parklands) 2009.

This impact is most significantly felt with regard to exempt and complying development. This is because the Cladding SEPP introduced a new clause 2.54(d1) into the Codes SEPP which states that if the development involves cladding or is attaching fittings or decorative work:

  • it must not be carried out on any building other than a 1 or 2 storey dwelling house, attached development or detached development
  • it must not involve the use of external combustible cladding.

This dramatically narrows the scope of works that can be undertaken as exempt development under the General Exempt Development Code in the Codes SEPP. In particular, many works which were previously permitted to be carried out as exempt, such as minor external building alterations on commercial buildings, will no longer be possible. Rather, developers will need to obtain development consent to conduct such works, even those relatively minor in nature.

What should you do next?

Owners of buildings with external combustible cladding should begin collecting information about their building to prepare for registration.

Owners can sign up here to be notified when the portal becomes available to avoid being penalised for late registration.

Any owner who is proposing to undertake works as exempt or complying development under the Codes SEPP should seek advice about the implications of these changes.

This publication does not deal with every important topic or change in law and is not intended to be relied upon as a substitute for legal or other advice that may be relevant to the reader's specific circumstances. If you have found this publication of interest and would like to know more or wish to obtain legal advice relevant to your circumstances please contact one of the named individuals listed.

ARTICLE
15 September 2018

Residential Focus – 12 September 2018: Part 1 - External combustible cladding

Australia Real Estate and Construction

Contributor

Holding Redlich, a national commercial law firm with offices in Melbourne, Canberra, Sydney, Brisbane, and Cairns, delivers tailored solutions with expert legal thinking and industry knowledge, prioritizing client partnerships.
See More Popular Content From

Mondaq uses cookies on this website. By using our website you agree to our use of cookies as set out in our Privacy Policy.

Learn More