United States: BREAKING NEWS: FAR Council Issues Final Rule And DOL Issues Final Guidance On Fair Pay And Safe Workplaces ("Blacklisting") Executive Order, Effective October 25, 2016

Today, the Federal Acquisition Regulations Council ("FAR Council") and the U.S. Department of Labor ("DOL") issued its Final Rule and Guidance implementing the Fair Pay and Safe Workplaces Executive Order (the "Order"), commonly referred to as the "blacklisting" rule. In total, the Final Rule, Guidance, and accompanying commentary totaled nearly 900 pages, responding to nearly 20,000 comments on the Proposed Rule and Guidance released earlier this year. Some of our previous blog posts on the Order and the Proposed Rule and Guidance can be found here and here. This post will highlight the notable changes and clarifications made in the Final Rule and Guidance as well as key takeaways for federal government contractors.

Effective Date

The Final Rule is effective on October 25, 2016. This is earlier than anticipated and dramatically shortens the time for contractors to prepare to comply with the Order and its implementing regulations. That being said, as discussed below, the Final Rule also phases in a number of the disclosure and compliance obligations, lessening the initial burden of the implementation.

Phase-In of Labor Violation Disclosure Requirements

One of the overarching concerns raised during the notice and comment period was the enormous burden the Order would place on the contracting community. In an effort to lessen that burden, the Final Rule and Guidance announced a phased implementation of the disclosure obligations. The phase-in has two key components.

First, the Order and the Proposed Rule contain a three-year look back for covered violations. Recognizing that contractors have not been cataloging covered labor violations prior to the issuance of the Order, the Final Rule only requires contractors to look back one year for reportable violations when the rule becomes effective. The look-back period will increase each year by one year until October 2018, when it will become a three-year look back.

Second, the Final Rule also limits which contractors must make labor law violation disclosures in the first six months following the effective date. Contractors will not be required to disclose labor law violations until April 24, 2017, unless the contractor is responding to a solicitation for a contract valued at $50 million or more after the effective date of the Final Rule. For most contractors, this provides an additional six-month window to prepare for the implementation of the disclosure obligations.

The phase-in of disclosure obligations does not just impact prime contractors. The Final Rule also included a lengthier phase-in for subcontractor disclosure obligations. Subcontractors must begin disclosing labor violations for solicitations issued after October 25, 2017, one year after the effective date.

A Pause on The Disclosure of "State Law Equivalent" Violations

When the Proposed Rule was released, the Proposed Guidance stated that a supplement would follow containing a list of which state-law equivalents for the 14 enumerated federal laws require disclosures of violations under the Order. To date, no list has been released. The Final Rule and Guidance acknowledge this and state that the DOL will release a comprehensive list of state laws that are covered by the Order. This listing will be subject to notice and comment before it becomes effective. In the meantime, only the 14 federal labor laws listed in the Proposed Rule and in the Order, along with state OSHA plans, are covered by the rule.

Minor Clarifications on Scope of Violations

Overall, despite numerous comments and criticisms, the DOL declined to substantively modify its list of covered labor violations in the Final Guidance. Thus, the list of administrative merits determinations, arbitral awards, and civil judgments remain exceptionally broad and sweeping.

Although the DOL declined to narrow its definition of a violation, the Final Guidance does contain some minor modifications that broaden the definition of a violation. For example, the definition of administrative merits determination in the Proposed Guidance did not include violations of the anti-retaliation provisions of the Occupational Safety and Health Act ("OSHA") or the Fair Labor Standards Act ("FLSA"). The final rule clarifies that these were unintentionally omitted from the Proposed Guidance and are now included in the Final Guidance. Additionally, the Proposed Guidance limited "determination letters" from the DOL Wage and Hour Division to letters outlining violations of Sections 6 and 7 of the FLSA (minimum wage and overtime). In the Final Guidance, the DOL has clarified that this was unintentionally narrow, and that the Final Guidance includes determination letters finding any FLSA violation.

Assessing A Subcontractor's Responsibility – Removing The Burden From The Prime

One highly controversial aspect of the Proposed Rule was the burden placed on the prime contractor to perform the same type of responsibility determination of covered subcontractors' labor violations that the government will perform on prime contractors. In response to numerous comments, the Final Rule has modified the process for assessing a subcontractor's violations, largely removing the burden from the prime contractor.

Instead, starting October 25, 2017, under the Final Rule, covered subcontractors will submit their list of labor violations to the Agency Labor Compliance Advisor ("ALCA"). The ALCA will then perform an assessment of the disclosed violations and make a recommendation. The prime contractor must make the ultimate decision as to responsibility. If the subcontractor disagrees with the finding of the ALCA, it can raise the dispute with the prime contractor.

Clarification of Assessment Process of The Labor Compliance Advisors

The Proposed Rule and Guidance introduced a new government official into the contracting process, the ALCA. There was substantial controversy surrounding this new role, particularly the potential disparate application of the Order between agencies and perhaps even within agencies. The Final Rule and Guidance provides additional details regarding the process by which federal agencies and departments will assess a contractor's labor violations. Moreover, the Final Rule and Guidance recognizes the need for guidelines and training for the ALCAs.

The Final Rule and Guidance states that the ALCA will have three days to assess labor violations disclosed by a contractor. Although the contracting officer is permitted to give the ALCA additional time, the contracting officer may make his or her own assessment of responsibility without the recommendation of the ALCA. The ultimate responsibility for making a responsibility determination will remain with the contracting officer, not the ALCA. The ALCA's role is to "assesses the nature of the violations and provide[] analysis and advice."

The Final Guidance also clarifies the process the ALCA will follow during his or her assessment. The ALCA will first review all of the violations to determine if any are "serious, repeated, willful, and/or pervasive." Then, the ALCA "weighs any serious, repeated, willful, and/or pervasive violations in light of the totality of the circumstances, including the severity of the violation(s), the size of the contractor, and any mitigating factors that are present." Finally, the ALCA provides written analysis to the contracting officer.

Public Dissemination of Disclosures

The Proposed Rule and Guidance noted that information submitted to the contracting agency would be publicly disseminated. Despite numerous comments criticizing this proposed provision, the Final Rule and Guidance declined to remove this requirement. However, the Final Rule and Guidance provided clarification as to how this public dissemination will work in practice. Pursuant to the Final Rule, the following information will be publicly disclosed based upon the contractor's violation submissions: (1) the law violated; (2) the case identification number or docket number; (3) the date of the decision finding a violation; and (4) the name of the body issuing the judgment.

The contractor will input this information into the System for Award Management ("SAM"). From SAM, the information will be made available to the public through the Federal Awardee Performance and Integrity Information System ("FAPIIS"). The Final Rule clarified that while the four enumerated data points must be made public, the contractor has the choice as to whether any additional documents provided by the contractor to demonstrate its responsibility and mitigation efforts shall be made public.

Key Takeaways

With the Final Rules and Guidance published, it is more important than ever that contractors begin preparing for the implementation of the Order and its regulations. Contractors have two months before the effective date of the Final Rule, and while certain obligations will be phased-in, contractors will need time to prepare for compliance.

Contractors should start cataloging any violations during the past six months that constitute covered violations as well as any evidence of mitigation efforts taken as a consequence of the violations. Because complaints and charges alleging violations of the 14 federal laws covered by the Order, a central official of office should be designated to coordinate the collection of this information (concerning both past and future violations) and a central repository for it. Contractors should view the ability quickly to provide a comprehensive list to the contracting officer as a competitive advantage, as competitors may not be prepared to do so in a timely manner.

Additionally, if the ALCA makes an inquiry concerning the disclosed violations, contractors should be prepared to advocate, with appropriate evidence, why certain violations are not willful, repeated, pervasive or severe. For instance, the contractor could point to its size or the number of employees in the organization. It can also identify measures taken by the contractor to address the issues raised in the violation. It will be important that these disclosures be vetted by a central authority within the organization.

In addition to preparing to report labor violations, contractors should also work internally to reduce and mitigate the risk of future violations. This can be achieved by: (1) developing and implementing effective policies and training; (2) auditing compliance; (3) adopting a robust internal complaint mechanism; (4) developing alternative dispute resolution processes; and (5) undertaking early case assessment and management. Taking these proactive measures can help lessen the impact of future compliance by reducing the number of violations that must be reported.

Webinar On The Final Rule and Guidance

Proskauer is hosting a webinar to discuss the Final Rule, practical implications of the Final Rule and what contractors should do to prepare for the Final Rule going into effect. The webinar is scheduled for September 13, 2016 at 1:00 p.m. EST. To register for the webinar, click here.

BREAKING NEWS: FAR Council Issues Final Rule And DOL Issues Final Guidance On Fair Pay And Safe Workplaces ("Blacklisting") Executive Order, Effective October 25, 2016

The content of this article is intended to provide a general guide to the subject matter. Specialist advice should be sought about your specific circumstances.

To print this article, all you need is to be registered on Mondaq.com.

Click to Login as an existing user or Register so you can print this article.

Authors
 
In association with
Related Video
Up-coming Events Search
Tools
Print
Font Size:
Translation
Channels
Mondaq on Twitter
 
Register for Access and our Free Biweekly Alert for
This service is completely free. Access 250,000 archived articles from 100+ countries and get a personalised email twice a week covering developments (and yes, our lawyers like to think you’ve read our Disclaimer).
 
Email Address
Company Name
Password
Confirm Password
Position
Mondaq Topics -- Select your Interests
 Accounting
 Anti-trust
 Commercial
 Compliance
 Consumer
 Criminal
 Employment
 Energy
 Environment
 Family
 Finance
 Government
 Healthcare
 Immigration
 Insolvency
 Insurance
 International
 IP
 Law Performance
 Law Practice
 Litigation
 Media & IT
 Privacy
 Real Estate
 Strategy
 Tax
 Technology
 Transport
 Wealth Mgt
Regions
Africa
Asia
Asia Pacific
Australasia
Canada
Caribbean
Europe
European Union
Latin America
Middle East
U.K.
United States
Worldwide Updates
Check to state you have read and
agree to our Terms and Conditions

Terms & Conditions and Privacy Statement

Mondaq.com (the Website) is owned and managed by Mondaq Ltd and as a user you are granted a non-exclusive, revocable license to access the Website under its terms and conditions of use. Your use of the Website constitutes your agreement to the following terms and conditions of use. Mondaq Ltd may terminate your use of the Website if you are in breach of these terms and conditions or if Mondaq Ltd decides to terminate your license of use for whatever reason.

Use of www.mondaq.com

You may use the Website but are required to register as a user if you wish to read the full text of the content and articles available (the Content). You may not modify, publish, transmit, transfer or sell, reproduce, create derivative works from, distribute, perform, link, display, or in any way exploit any of the Content, in whole or in part, except as expressly permitted in these terms & conditions or with the prior written consent of Mondaq Ltd. You may not use electronic or other means to extract details or information about Mondaq.com’s content, users or contributors in order to offer them any services or products which compete directly or indirectly with Mondaq Ltd’s services and products.

Disclaimer

Mondaq Ltd and/or its respective suppliers make no representations about the suitability of the information contained in the documents and related graphics published on this server for any purpose. All such documents and related graphics are provided "as is" without warranty of any kind. Mondaq Ltd and/or its respective suppliers hereby disclaim all warranties and conditions with regard to this information, including all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement. In no event shall Mondaq Ltd and/or its respective suppliers be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of information available from this server.

The documents and related graphics published on this server could include technical inaccuracies or typographical errors. Changes are periodically added to the information herein. Mondaq Ltd and/or its respective suppliers may make improvements and/or changes in the product(s) and/or the program(s) described herein at any time.

Registration

Mondaq Ltd requires you to register and provide information that personally identifies you, including what sort of information you are interested in, for three primary purposes:

  • To allow you to personalize the Mondaq websites you are visiting.
  • To enable features such as password reminder, newsletter alerts, email a colleague, and linking from Mondaq (and its affiliate sites) to your website.
  • To produce demographic feedback for our information providers who provide information free for your use.

Mondaq (and its affiliate sites) do not sell or provide your details to third parties other than information providers. The reason we provide our information providers with this information is so that they can measure the response their articles are receiving and provide you with information about their products and services.

If you do not want us to provide your name and email address you may opt out by clicking here .

If you do not wish to receive any future announcements of products and services offered by Mondaq by clicking here .

Information Collection and Use

We require site users to register with Mondaq (and its affiliate sites) to view the free information on the site. We also collect information from our users at several different points on the websites: this is so that we can customise the sites according to individual usage, provide 'session-aware' functionality, and ensure that content is acquired and developed appropriately. This gives us an overall picture of our user profiles, which in turn shows to our Editorial Contributors the type of person they are reaching by posting articles on Mondaq (and its affiliate sites) – meaning more free content for registered users.

We are only able to provide the material on the Mondaq (and its affiliate sites) site free to site visitors because we can pass on information about the pages that users are viewing and the personal information users provide to us (e.g. email addresses) to reputable contributing firms such as law firms who author those pages. We do not sell or rent information to anyone else other than the authors of those pages, who may change from time to time. Should you wish us not to disclose your details to any of these parties, please tick the box above or tick the box marked "Opt out of Registration Information Disclosure" on the Your Profile page. We and our author organisations may only contact you via email or other means if you allow us to do so. Users can opt out of contact when they register on the site, or send an email to unsubscribe@mondaq.com with “no disclosure” in the subject heading

Mondaq News Alerts

In order to receive Mondaq News Alerts, users have to complete a separate registration form. This is a personalised service where users choose regions and topics of interest and we send it only to those users who have requested it. Users can stop receiving these Alerts by going to the Mondaq News Alerts page and deselecting all interest areas. In the same way users can amend their personal preferences to add or remove subject areas.

Cookies

A cookie is a small text file written to a user’s hard drive that contains an identifying user number. The cookies do not contain any personal information about users. We use the cookie so users do not have to log in every time they use the service and the cookie will automatically expire if you do not visit the Mondaq website (or its affiliate sites) for 12 months. We also use the cookie to personalise a user's experience of the site (for example to show information specific to a user's region). As the Mondaq sites are fully personalised and cookies are essential to its core technology the site will function unpredictably with browsers that do not support cookies - or where cookies are disabled (in these circumstances we advise you to attempt to locate the information you require elsewhere on the web). However if you are concerned about the presence of a Mondaq cookie on your machine you can also choose to expire the cookie immediately (remove it) by selecting the 'Log Off' menu option as the last thing you do when you use the site.

Some of our business partners may use cookies on our site (for example, advertisers). However, we have no access to or control over these cookies and we are not aware of any at present that do so.

Log Files

We use IP addresses to analyse trends, administer the site, track movement, and gather broad demographic information for aggregate use. IP addresses are not linked to personally identifiable information.

Links

This web site contains links to other sites. Please be aware that Mondaq (or its affiliate sites) are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of these third party sites. This privacy statement applies solely to information collected by this Web site.

Surveys & Contests

From time-to-time our site requests information from users via surveys or contests. Participation in these surveys or contests is completely voluntary and the user therefore has a choice whether or not to disclose any information requested. Information requested may include contact information (such as name and delivery address), and demographic information (such as postcode, age level). Contact information will be used to notify the winners and award prizes. Survey information will be used for purposes of monitoring or improving the functionality of the site.

Mail-A-Friend

If a user elects to use our referral service for informing a friend about our site, we ask them for the friend’s name and email address. Mondaq stores this information and may contact the friend to invite them to register with Mondaq, but they will not be contacted more than once. The friend may contact Mondaq to request the removal of this information from our database.

Security

This website takes every reasonable precaution to protect our users’ information. When users submit sensitive information via the website, your information is protected using firewalls and other security technology. If you have any questions about the security at our website, you can send an email to webmaster@mondaq.com.

Correcting/Updating Personal Information

If a user’s personally identifiable information changes (such as postcode), or if a user no longer desires our service, we will endeavour to provide a way to correct, update or remove that user’s personal data provided to us. This can usually be done at the “Your Profile” page or by sending an email to EditorialAdvisor@mondaq.com.

Notification of Changes

If we decide to change our Terms & Conditions or Privacy Policy, we will post those changes on our site so our users are always aware of what information we collect, how we use it, and under what circumstances, if any, we disclose it. If at any point we decide to use personally identifiable information in a manner different from that stated at the time it was collected, we will notify users by way of an email. Users will have a choice as to whether or not we use their information in this different manner. We will use information in accordance with the privacy policy under which the information was collected.

How to contact Mondaq

You can contact us with comments or queries at enquiries@mondaq.com.

If for some reason you believe Mondaq Ltd. has not adhered to these principles, please notify us by e-mail at problems@mondaq.com and we will use commercially reasonable efforts to determine and correct the problem promptly.