United States: The Affordable Care Act's Reporting Requirements For Carriers And Employers (Part 14 of 24): Coding Form 1095-C, Part II For Mid-Month Hires, Re-Hires And Terminations

When reporting offers of coverage to full-time employees under the Affordable Care Act's (ACA) employer shared responsibility rules, much of the detail appears in Part II of IRS Form 1095-C, Lines 14, 15 and 16. For the most part, the instructions to Forms 1095-C (and also Form 1094-C) are clear enough, but the decision by the regulators to also use Form 1095-C to both solicit information relating to compliance with the ACA's individual responsibility rules and to collect information necessary to administer premium tax subsidies, has made the form more complicated than many had hoped or expected. This is particularly true in the case of reporting for employees with less than full months of coverage.

This post explains the rules that apply when reporting offers of coverage for mid-month hires, re-hires and terminations.

Mid-Month Hires

The instructions provide the following rule relating to mid-month hires:

"An employer offers health coverage for a month only if it offers health coverage that would provide coverage for every day of that calendar month." (Emphasis added).

Even where an employee receives an offer of coverage on his or her first day of employment, the proper Line 14 indicator code for the month is 1H (no offer of coverage). The same is true if the effective date of coverage is deferred until the employee completes an otherwise permissible waiting period. The final regulations implementing the ACA's employer shared responsibility rules do not penalize employers that otherwise make a timely offer of coverage mid-month, however. This is so irrespective of whether the offer of coverage is immediate or follows an otherwise permissible waiting period.

The ACA also added a separate rule limiting waiting periods to 90 days. The final regulations implementing the waiting period rules permit an orientation period of up to 30 days in addition to the 90-day waiting period. While this rule appears to be intended to permit the coordination of the 3-plus month delay under the employer shared responsibility rules with the waiting period rules, most employers appear to be adopting waiting periods of 90 days or less.

The final waiting period rules also adopt a rule for waiting periods that rely on cumulative hours of service. This latter rule generally allows employers to impose a cumulative hours of service requirement of up to 1,200 hours without violating the waiting period requirement. What has not been made entirely clear is whether compliance with the cumulative hours of service requirement avoids penalties under Code § 4980H for an employer who elects to determine an employee's status under the monthly measurement method. For an excellent discussion of this question, please click here.

  • Coverage offered to employees and dependents that is either unaffordable or fails to provide minimum value: monthly measurement method for new full-time employee under the look-back measurement method

Penalties associated with offers of coverage under the monthly measurement method, and in the case of new full-time employees under the look-back measurement method, are generally subject to a 3-plus month delay. Even where the coverage is unaffordable or fails to provide minimum value, no penalty is imposed under Code § 4980H(a) (generally considered the far more onerous penalty) for the three full calendar month period beginning with the first full calendar month of employment, provided that coverage is offered immediately thereafter. Where the offered coverage does not provide minimum value, Form 1095-C, Part II, Lines 15 and 16 will be left blank, indicating that the employer may be subject to penalties under Code § 4980H(b) during the first three full calendar months of employment. For the months preceding the month that includes the date of hire, the Line 16 series-2 indicator code would be 2A (employee not employed during the month). The subsequent extension of coverage, beginning with the first full month during which coverage is offered, will be reported on Form 1094-C, Part III, where the employer certifies whether it made an offer of coverage to a sufficiently large percentage of employees to avoid exposure to penalties under Code § 4980H(a). Once coverage is offered, the series-1 indicator code would switch to 1F (minimum essential coverage not providing minimum value).

  • Coverage offered to employees and dependents that is either unaffordable or fails to provide minimum value: part-time, seasonal or variable hour employees under the look-back measurement method

Part-time, seasonal or variable hour employees are not treated as full-time employees for Code § 4980H purposes during their initial measurement periods. Where coverage is offered to substantially all full-time employees (70% in 2015, 95% in 2016 and later years), but where that coverage is either unaffordable or fails to provide minimum value (as we assume here), no penalty is imposed under Code § 4980H(a) during the initial measurement period and any associated administrative period, provided that coverage is offered immediately thereafter. Similar to the treatment under the monthly measurement method described above, if the offered coverage does not provide minimum value, Form 1095-C, Part II, Lines 15 and 16 will be left blank, indicating that the employer may be subject to penalties under Code § 4980H(b) during the first three full calendar months of employment. For the months preceding the month that includes the date of hire, the Line 16 series-2 indicator code would be 2A (employee not employed during the month). The timely extension of coverage will impact the response to Form 1094-C, Part III relating to whether the employer makes an offer of coverage to a sufficiently large percentage of employees to avoid exposure to penalties. Once coverage is offered, the series-1 indicator code would switch to 1F (minimum essential coverage not providing minimum value).

  • Coverage offered to substantially all full-time employees that is both affordable and provides minimum value: monthly measurement method and look-back measurement method

The final Code § 4980H regulations provide that no liability for assessable payments is incurred during a "limited non-assessment period." Where an applicable large employer elects to determine full-time employee status under the monthly measurement method, the limited non-assessment period is the three full calendar month period beginning with the first full calendar month of employment. In the case of an applicable large employer that elects to determine full-time employee status under the look-back measurement method there are two possibilities. For a new employee who is reasonably expected to be full-time, the limited non-assessment period extends to the first of the month following the employee's initial three full calendar months of employment. For a new employee who is reasonably expected to be part-time, seasonal or temporary, the limited non-assessment period extends to the first of the month following the employee's initial measurement period and any associated administrative period.

Where the offered coverage provides minimum value, and provided that coverage is timely offered thereafter, no penalties are imposed during the "4980H(b) limited non-assessment period" despite that the actual offer of coverage is delayed. (For a discussion of what constitutes a 4980H(b) limited non-assessment period, please see our previous post.) For the months preceding the month that includes the date of hire, the Line 16 series-2 indicator code would be 2A (employee not employed during the month). For the initial month of coverage, and during the balance of the 4980H(b) limited non-assessment period, the proper series-1 indicator code on Form 1095-C, Part II, Line 14 is 1H (no offer of coverage); Line 15 is left blank; and the proper series-2 indicator code on Line 16 is 2D (4980H(b) limited non-assessment period).

Once the 4980H(b) limited non-assessment period ends, Line 14 would report the appropriate offer of coverage indicator code (1A (qualifying offer), 1C (minimum essential coverage providing minimum value offered to employee and at least minimum essential coverage offered to dependent(s) (not spouse)) or 1E (minimum essential coverage providing minimum value offered to employee and at least minimum essential coverage offered to dependent(s) and spouse)). (Indicator code 1B (minimum essential coverage providing minimum value offered to employee only) may also be used in the case of an employee who qualifies for the dependent coverage transitional rule.) Line 15 would report the "employee share of the lowest cost monthly premium for self-only minimum value coverage." And Line 16 would report the appropriate affordability safe harbor. These include 2F (W-2 safe harbor), 2G (federal poverty line safe harbor), and 2H (rate of pay safe harbor).

Where a new part-time, seasonal or variable hour hire is either not an employee or is under his or her initial measurement period (i.e., in a limited non-assessment period) for each month during the calendar year, then no Form 1095-C need be filed for the new hire for the year. To qualify for this treatment, the new hire and his or her dependent(s) must be eligible for an offer of health coverage no later than the end of the applicable waiting period or initial measurement period as the case may be.

Mid-Month Re-Hires

The treatment of re-hires depends on whether there has been a break-in-service for employer shared responsibility purposes. Under both the monthly measurement method and look-back measurement method, a full-time employee returning to a previous employer after a break in service of less than 13 consecutive weeks (or 26 weeks in the case of an educational institution) is treated as a "continuing employee" and not a new hire. A continuing employee being tested under the monthly measurement method, or a continuing employee in a stability period under the look-back measurement method, must generally be offered coverage as of the first day he or she is credited with an hour of service upon returning to work or as soon as administratively practicable thereafter. An offer of coverage made by the first day of the calendar month after returning to work is deemed to be made as soon as administratively practicable. An employee who is rehired following a break-in-service may be treated as a new hire.

If a continuing employee returns to work, without incurring a break-in-service, during a stability period with respect to which he or she previously qualified for (having been timely offered and declined) coverage, a special rule applies. If the employee previously declined the employer's offer of coverage, the employer is treated as having offered coverage for the entire stability period. The employer is not required to make a new offer of coverage for the remainder of the stability period due to the employee's resumption of services.

While the rules governing continuing employees work fine in the case of an employee who is re-hired early in a calendar month, it's less clear how to apply them in the case of a continuing employee who is re-hired, say, on the last day of the month. If, for example, an employer can make the offer of coverage available as of the end of the following week, and if the employee thereupon immediately re-enrolled, coverage would not be offered on each day of the month. So there would be no offer of coverage for the month, and the appropriate series-1 indicator code would be 1H (no offer of coverage). Provided the coverage is both affordable and provides minimum value, the proper series-2 indicator code is 2D (employee in a section 4980H(b) limited non-assessment period).

Mid-Month Terminations

Recall that, if an employee terminates coverage before the last day of the month, the employee is not treated as having an offer of coverage for that month. Where an employee terminates coverage before the last day of the month, the instructions are again helpful:

Enter code 2B also if the employee is a full-time employee for the month and whose offer of coverage (or coverage if the employee was enrolled) ended before the last day of the month solely because the employee terminated employment during the month (so that the offer of coverage or coverage would have continued if the employee had not terminated employment during the month).

Thus, in the month of termination, Form 1095-C, Line 14 would be coded 1H (no offer of coverage); Line 15 would be left blank; and Line 16 would be coded 2B (employee not a full-time employee). Mid-month terminations and reductions in hours also implicate COBRA, which will be the subject of our next post in the series.

The content of this article is intended to provide a general guide to the subject matter. Specialist advice should be sought about your specific circumstances.

To print this article, all you need is to be registered on Mondaq.com.

Click to Login as an existing user or Register so you can print this article.

Authors
Alden J. Bianchi
 
In association with
Related Video
Up-coming Events Search
Tools
Print
Font Size:
Translation
Channels
Mondaq on Twitter
 
Register for Access and our Free Biweekly Alert for
This service is completely free. Access 250,000 archived articles from 100+ countries and get a personalised email twice a week covering developments (and yes, our lawyers like to think you’ve read our Disclaimer).
 
Email Address
Company Name
Password
Confirm Password
Position
Mondaq Topics -- Select your Interests
 Accounting
 Anti-trust
 Commercial
 Compliance
 Consumer
 Criminal
 Employment
 Energy
 Environment
 Family
 Finance
 Government
 Healthcare
 Immigration
 Insolvency
 Insurance
 International
 IP
 Law Performance
 Law Practice
 Litigation
 Media & IT
 Privacy
 Real Estate
 Strategy
 Tax
 Technology
 Transport
 Wealth Mgt
Regions
Africa
Asia
Asia Pacific
Australasia
Canada
Caribbean
Europe
European Union
Latin America
Middle East
U.K.
United States
Worldwide Updates
Check to state you have read and
agree to our Terms and Conditions

Terms & Conditions and Privacy Statement

Mondaq.com (the Website) is owned and managed by Mondaq Ltd and as a user you are granted a non-exclusive, revocable license to access the Website under its terms and conditions of use. Your use of the Website constitutes your agreement to the following terms and conditions of use. Mondaq Ltd may terminate your use of the Website if you are in breach of these terms and conditions or if Mondaq Ltd decides to terminate your license of use for whatever reason.

Use of www.mondaq.com

You may use the Website but are required to register as a user if you wish to read the full text of the content and articles available (the Content). You may not modify, publish, transmit, transfer or sell, reproduce, create derivative works from, distribute, perform, link, display, or in any way exploit any of the Content, in whole or in part, except as expressly permitted in these terms & conditions or with the prior written consent of Mondaq Ltd. You may not use electronic or other means to extract details or information about Mondaq.com’s content, users or contributors in order to offer them any services or products which compete directly or indirectly with Mondaq Ltd’s services and products.

Disclaimer

Mondaq Ltd and/or its respective suppliers make no representations about the suitability of the information contained in the documents and related graphics published on this server for any purpose. All such documents and related graphics are provided "as is" without warranty of any kind. Mondaq Ltd and/or its respective suppliers hereby disclaim all warranties and conditions with regard to this information, including all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement. In no event shall Mondaq Ltd and/or its respective suppliers be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of information available from this server.

The documents and related graphics published on this server could include technical inaccuracies or typographical errors. Changes are periodically added to the information herein. Mondaq Ltd and/or its respective suppliers may make improvements and/or changes in the product(s) and/or the program(s) described herein at any time.

Registration

Mondaq Ltd requires you to register and provide information that personally identifies you, including what sort of information you are interested in, for three primary purposes:

  • To allow you to personalize the Mondaq websites you are visiting.
  • To enable features such as password reminder, newsletter alerts, email a colleague, and linking from Mondaq (and its affiliate sites) to your website.
  • To produce demographic feedback for our information providers who provide information free for your use.

Mondaq (and its affiliate sites) do not sell or provide your details to third parties other than information providers. The reason we provide our information providers with this information is so that they can measure the response their articles are receiving and provide you with information about their products and services.

If you do not want us to provide your name and email address you may opt out by clicking here .

If you do not wish to receive any future announcements of products and services offered by Mondaq by clicking here .

Information Collection and Use

We require site users to register with Mondaq (and its affiliate sites) to view the free information on the site. We also collect information from our users at several different points on the websites: this is so that we can customise the sites according to individual usage, provide 'session-aware' functionality, and ensure that content is acquired and developed appropriately. This gives us an overall picture of our user profiles, which in turn shows to our Editorial Contributors the type of person they are reaching by posting articles on Mondaq (and its affiliate sites) – meaning more free content for registered users.

We are only able to provide the material on the Mondaq (and its affiliate sites) site free to site visitors because we can pass on information about the pages that users are viewing and the personal information users provide to us (e.g. email addresses) to reputable contributing firms such as law firms who author those pages. We do not sell or rent information to anyone else other than the authors of those pages, who may change from time to time. Should you wish us not to disclose your details to any of these parties, please tick the box above or tick the box marked "Opt out of Registration Information Disclosure" on the Your Profile page. We and our author organisations may only contact you via email or other means if you allow us to do so. Users can opt out of contact when they register on the site, or send an email to unsubscribe@mondaq.com with “no disclosure” in the subject heading

Mondaq News Alerts

In order to receive Mondaq News Alerts, users have to complete a separate registration form. This is a personalised service where users choose regions and topics of interest and we send it only to those users who have requested it. Users can stop receiving these Alerts by going to the Mondaq News Alerts page and deselecting all interest areas. In the same way users can amend their personal preferences to add or remove subject areas.

Cookies

A cookie is a small text file written to a user’s hard drive that contains an identifying user number. The cookies do not contain any personal information about users. We use the cookie so users do not have to log in every time they use the service and the cookie will automatically expire if you do not visit the Mondaq website (or its affiliate sites) for 12 months. We also use the cookie to personalise a user's experience of the site (for example to show information specific to a user's region). As the Mondaq sites are fully personalised and cookies are essential to its core technology the site will function unpredictably with browsers that do not support cookies - or where cookies are disabled (in these circumstances we advise you to attempt to locate the information you require elsewhere on the web). However if you are concerned about the presence of a Mondaq cookie on your machine you can also choose to expire the cookie immediately (remove it) by selecting the 'Log Off' menu option as the last thing you do when you use the site.

Some of our business partners may use cookies on our site (for example, advertisers). However, we have no access to or control over these cookies and we are not aware of any at present that do so.

Log Files

We use IP addresses to analyse trends, administer the site, track movement, and gather broad demographic information for aggregate use. IP addresses are not linked to personally identifiable information.

Links

This web site contains links to other sites. Please be aware that Mondaq (or its affiliate sites) are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of these third party sites. This privacy statement applies solely to information collected by this Web site.

Surveys & Contests

From time-to-time our site requests information from users via surveys or contests. Participation in these surveys or contests is completely voluntary and the user therefore has a choice whether or not to disclose any information requested. Information requested may include contact information (such as name and delivery address), and demographic information (such as postcode, age level). Contact information will be used to notify the winners and award prizes. Survey information will be used for purposes of monitoring or improving the functionality of the site.

Mail-A-Friend

If a user elects to use our referral service for informing a friend about our site, we ask them for the friend’s name and email address. Mondaq stores this information and may contact the friend to invite them to register with Mondaq, but they will not be contacted more than once. The friend may contact Mondaq to request the removal of this information from our database.

Security

This website takes every reasonable precaution to protect our users’ information. When users submit sensitive information via the website, your information is protected using firewalls and other security technology. If you have any questions about the security at our website, you can send an email to webmaster@mondaq.com.

Correcting/Updating Personal Information

If a user’s personally identifiable information changes (such as postcode), or if a user no longer desires our service, we will endeavour to provide a way to correct, update or remove that user’s personal data provided to us. This can usually be done at the “Your Profile” page or by sending an email to EditorialAdvisor@mondaq.com.

Notification of Changes

If we decide to change our Terms & Conditions or Privacy Policy, we will post those changes on our site so our users are always aware of what information we collect, how we use it, and under what circumstances, if any, we disclose it. If at any point we decide to use personally identifiable information in a manner different from that stated at the time it was collected, we will notify users by way of an email. Users will have a choice as to whether or not we use their information in this different manner. We will use information in accordance with the privacy policy under which the information was collected.

How to contact Mondaq

You can contact us with comments or queries at enquiries@mondaq.com.

If for some reason you believe Mondaq Ltd. has not adhered to these principles, please notify us by e-mail at problems@mondaq.com and we will use commercially reasonable efforts to determine and correct the problem promptly.