UK: Impact of the New Rules for Technology Licences in Europe

Last Updated: 20 September 2004
Article by Jonathan Nugent

The European Commission has adopted a new Technology Transfer Block Exemption Regulation, which came into effect on 1 May 2004. The Regulation provides a "safe harbour" from the effects of EU competition rules for certain types of technology licence agreements.

The original proposals for reform of the EU’s technology transfer rules, published in September 2003, were highly controversial and prompted heavy criticism from businesses involved in technology licensing. Many argued that they did not take sufficient account of the realities and benefits of licensing in high technology sectors such as pharmaceuticals and biotechnology. Following a consultation process, the new rules were revised to address a number of the criticisms raised, but the new Regulation still retains a number of the controversial features of the original proposals. The new rules will undoubtedly be of great significance for businesses entering into (and those which have already entered into) technology licence agreements with effects in Europe.


The Regulation provides a "block exemption" under which certain categories of technology licence agreements are automatically exempted from Article 81(1) of the Treaty of Rome which prohibits anti-competitive agreements which affect trade between Member States. Agreements which have anti-competitive effects may be exempted under Article 81(3) if their positive benefits for the production or distribution of goods or technical or economic progress outweigh their negative effects.

It replaces the previous technology transfer block exemption issued in 1996, with effect from 1 May 2004. This is a very significant date in the history of the EU, as it coincides with the enlargement of the EU through the admission of ten new member states (the Czech Republic, Poland, Hungary, Slovak Republic, Slovenia, Latvia, Lithuania, Estonia, Malta and Cyprus). The introduction of the new Regulation is part of a much wider reform of EU competition law designed to modernise and simplify the enforcement of competition law to cope with enlargement, including removal of the procedure for individually notifying agreements to the European Commission for assessment.

The new Regulation takes account of criticism that the previous rules were too restrictive, and imposed a "strait jacket" on drafting of technology licences, by setting out prescriptive lists of banned and permitted clauses. In drawing up the new block exemption, the Commission aimed to take an economic and effects-based approach which better reflects the real competitive effects of agreements, and is in line with other Block Exemption Regulations. However, the new rules contain a number of highly controversial features, such as the introduction of market share thresholds above which the exemption will not apply.

The Regulation is accompanied by a lengthy set of guidelines drawn up by the Commission which contain guidance both on the application of the Regulation itself and also on how certain types of agreements and clauses which fall outside it should be treated.

One of the most important points to bear in mind (and which is now further emphasised in the guidelines) is that agreements which fall outside the safe harbour of the Regulation are not automatically deemed to be restrictive of competition (and therefore prohibited). Instead, they must be considered individually on their own merits to determine whether they are anti-competitive (under Article 81(1)) and if so whether they may benefit from the exemption under Article 81(3). The guidelines recognise that technology licences are often pro-competitive and may bring new products on to existing markets or create new markets and that they may avoid unnecessary duplication of research costs.

Nevertheless, agreements which do not fall within the Regulation may be open to challenge in national courts or by competition authorities if they do have anti-competitive effects. Businesses entering into technology licence agreements will therefore generally wish to ensure their agreements fall within its scope if possible, to obtain the certainty of benefiting from the block exemption.


The Regulation applies to agreements under which technology is licensed for the production of goods or services using that technology. Both the previous and new Regulations apply to patents and know-how, but the new one will also apply to designs and software copyright. For the exemption to apply, the relevant IP rights must remain in force and not have been declared invalid, and know-how must be secret, identified and substantial (which is defined as meaning "significant and useful"). Other IP rights which may be significant in some technology licensing agreements, such as database rights, are not covered.

The Regulation also applies only to agreements between two parties or "undertakings". Agreements involving multiple parties are not covered by the Regulation, but the Guidelines provide guidance on the treatment of certain types of multi-party arrangements such as patent-pooling arrangements. The Guidelines also deal with the application of the new Regulation to settlement agreements: licences entered into to settle infringement disputes may potentially fall within its scope.

Market Share Thresholds

Under the new regime, it is necessary to determine whether or not the parties are competitors, as well as their market share. The exemption only applies to:

  • agreements between competing parties whose combined market share does not exceed 20% of the relevant product and technology markets, and
  • agreements between non-competing parties if each of their market shares does not exceed 30% of the relevant product and technology markets.

The definitions of competitor, product market and technology market and the method of calculation of market shares are all complex issues and may be open to differing interpretations.

The assessment of market shares must be made both on entering into the agreement and on an ongoing annual basis, since agreements which fall within the exemption at the outset may subsequently lose the benefit of the exemption if market shares exceed the thresholds for more than two years. Market analysis in advance of drafting any licensing agreement, and on an annual basis during the term, will therefore be important to ensure that the agreement falls and remains within the exemption.

Clearly, this approach presents particular difficulties for licensing of new technologies which may start off with a low (or zero) market share, but if successful may achieve a very high share or create an entirely new market. The Commission has addressed this to some degree by providing a second "safe harbour" in the Guidelines based on the number of competing technologies that are available to potential licensees at a comparable cost. Even so, in many cases there will be an unwelcome degree of uncertainty as to whether the exemption is and will remain applicable, and detailed and potentially costly assessment may be required.

Existing Agreements

A further controversial aspect is that agreements which existed before 1 May 2004 are also subject to the new rules following the expiry of a transitional period at the end of March 2006. This means that agreements which were exempted under the old rules when originally entered into may not benefit from the new block exemption once this period has ended. As a result, businesses which have entered into licence agreements will need to review them during the transitional period to ascertain whether they will still be enforceable. In some cases, renegotiation may be necessary—a potentially difficult proposition since the parties’ positions will be likely to have altered since the agreement was entered into.

Prohibited Clauses

Instead of the so-called "black", "grey" and "white" lists set out in of the previous block exemption, there are now lists of "hardcore restrictions" and "excluded restrictions". If any hardcore restrictions are included, the agreement as a whole will fall outside the scope of the Regulation. Excluded restrictions are clauses which themselves fall outside the scope of the exemption, but which may be severed from the agreement so that the remaining provisions can be within its scope.

The distinction between competitors and non-competitors is also important in this context, as there are separate lists of hardcore restrictions for agreements between competitors and those between non-competitors; the Commission takes the view that agreements between competitors are more likely to raise competition concerns, and so tighter control of their provisions is required. One concern raised during the consultation period was that parties who were not competitors at the start of a licence agreement could become so during the course of the licence agreement, and would suddenly have to take into account a new set of hardcore restrictions. The final rules provide that, where the parties start off as non-competitors, the hardcore list for non-competitors will remain applicable throughout the life-time of the agreement even if the parties subsequently become competitors, so long as the agreement is not subsequently amended in a material way.

Hardcore Restrictions in Agreements Between Competitors

The list of hardcore restrictions for agreements between competitors includes:

  • Price fixing.
  • Reciprocal limitations on output.
  • Restrictions on exploitation of a licensee’s own technology, and restrictions on research and development by either party (except where this is indispensable to prevent disclosure of the licensed know-how).
  • Allocation of markets or customers between the parties—although this is subject to a number of significant exceptions, which mean that the following types of clauses will generally be permitted:
    • Field of use restrictions are now permitted in both cross-licensing and one-way agreements (the original draft would have permitted field of use restrictions in one-way agreements only).
    • The licensor may be restricted from granting further licences of the same technology in a particular territory.
    • In a non-reciprocal (one-way) agreement, the parties are able to allocate exclusive territories and customer groups between themselves, and to restrict active and passive sales into each other’s exclusive territories or customer groups. The licensee may also be restricted from making active (but not passive) sales into a territory or customer group exclusively allocated to another licensee, so long as the agreement is non-reciprocal and the second licensee was not a competitor of the licensor when it was appointed. Again, this represents a significant relaxation from the Commission’s original proposals.
    • Captive use (i.e., limiting the licence to the licensee’s use only).
    • Restriction of supply by the licensee to a single customer, so that a licensor can create a second source of supply for a named customer.

Hardcore Restrictions in Agreements Between Non-competitors

The list of hardcore restrictions for agreements between non-competitors includes:

  • Price fixing (except that in this case, the agreement may include a maximum or recommended sale price so long as this does not amount to a fixed or minimum sale price, for example, as a result of incentives offered by the licensor).
  • Restriction of the territory into which, or the customers to whom, the licensee may make passive sales of the licensed products. This is more generous than for agreements between competitors, as restrictions on active sales are generally permitted, as are restrictions on passive sales by the licensor. There are also significant exceptions which mean that:
    • Restrictions on passive sales by the licensee into a territory or customer group reserved exclusively for the licensor will be permitted.
    • Licensees can be restricted from making passive sales into an exclusive territory or customer group allocated to another licensee for the first two years of sales by the other licensee, in order to enable the second licensee to become established.
    • Licensees may also be restricted to making sales at wholesale level only, or to producing as a second source of supply for a particular customer.
    • In a selective distribution system, a licensee which operates at retail level may not be prevented from making active or passive sales to end-users, but all licensees may be restricted from selling (actively or passively) to unauthorised distributors.

Excluded Restrictions

The list of excluded restrictions includes:

  • Obligations on the licensee to assign or grant an exclusive licence of its improvements to the licensor where these are "severable". (A severable improvement is one which may be exploited without infringing the licensed IPR or know-how). Under the new rules, it is now possible for a licensor to request a non-exclusive grant-back of severable improvements from the licensee without the licensor having to offer to license its own improvements to the licensee.
  • Obligations on the licensee not to challenge the validity of the licensed IPR, although one can include provisions that the agreement may be terminated in the event of a challenge by the licensee, and prohibitions on challenges to the secrecy or substantiality of licensed know-how are permitted. In addition, the Guidelines recognise that "no challenge" clauses may generally be included in settlement agreements without contravening Article 81(1).
  • Restrictions in an agreement between non-competitors on exploitation of the licensee’s own technology, and restrictions on research and development by either party (except where this is indispensable to prevent disclosure of the licensed know-how). As noted above, this type of clause is classified as a hardcore restriction when included in an agreement between competitors.

Withdrawal of the Benefit of the Regulation

Even where the block exemption does apply, the Commission may withdraw its benefit in circumstances where a third party's technology or potential licensees are prevented from accessing the market by a network of similar restrictive agreements, or where the parties fail to exploit the licensed technology without any valid reason.


Despite significant improvements in the Regulation from the original proposals, many businesses remain concerned by the uncertainty caused by the introduction of the market share thresholds, and there has been criticism that the new rules may act as a disincentive to exploitation and development of technology by licensing in Europe. Whatever the advantages and disadvantages of the new rules, it is clear that businesses entering into licence agreements in order to exploit technology within the European Union will need to have regard to them and to the Guidelines. They will need to assess their market share both on entering into the agreement and regularly during the term, and take care in drafting agreements to avoid the identified types of prohibited clauses. To deal with future challenges, it may well help parties to keep careful records of the data and reasoning on which assessments of proposed agreements are based. Businesses with a portfolio of existing licences will need to review them and undertake any necessary renegotiation during the transitional period.

A copy of the final Commission Regulation on the application of Article 81(3) of the Treaty to categories of technology transfer agreements plus the guidelines can be found at

Copyright © 2007, Mayer, Brown, Rowe & Maw LLP. and/or Mayer Brown International LLP. This Mayer Brown article provides information and comments on legal issues and developments of interest. The foregoing is not a comprehensive treatment of the subject matter covered and is not intended to provide legal advice. Readers should seek specific legal advice before taking any action with respect to the matters discussed herein.

Mayer Brown is a combination of two limited liability partnerships: one named Mayer Brown LLP, established in Illinois, USA; and one named Mayer Brown International LLP, incorporated in England.

To print this article, all you need is to be registered on

Click to Login as an existing user or Register so you can print this article.

In association with
Related Video
Up-coming Events Search
Font Size:
Mondaq on Twitter
Register for Access and our Free Biweekly Alert for
This service is completely free. Access 250,000 archived articles from 100+ countries and get a personalised email twice a week covering developments (and yes, our lawyers like to think you’ve read our Disclaimer).
Email Address
Company Name
Confirm Password
Mondaq Topics -- Select your Interests
 Law Performance
 Law Practice
 Media & IT
 Real Estate
 Wealth Mgt
Asia Pacific
European Union
Latin America
Middle East
United States
Worldwide Updates
Check to state you have read and
agree to our Terms and Conditions

Terms & Conditions and Privacy Statement (the Website) is owned and managed by Mondaq Ltd and as a user you are granted a non-exclusive, revocable license to access the Website under its terms and conditions of use. Your use of the Website constitutes your agreement to the following terms and conditions of use. Mondaq Ltd may terminate your use of the Website if you are in breach of these terms and conditions or if Mondaq Ltd decides to terminate your license of use for whatever reason.

Use of

You may use the Website but are required to register as a user if you wish to read the full text of the content and articles available (the Content). You may not modify, publish, transmit, transfer or sell, reproduce, create derivative works from, distribute, perform, link, display, or in any way exploit any of the Content, in whole or in part, except as expressly permitted in these terms & conditions or with the prior written consent of Mondaq Ltd. You may not use electronic or other means to extract details or information about’s content, users or contributors in order to offer them any services or products which compete directly or indirectly with Mondaq Ltd’s services and products.


Mondaq Ltd and/or its respective suppliers make no representations about the suitability of the information contained in the documents and related graphics published on this server for any purpose. All such documents and related graphics are provided "as is" without warranty of any kind. Mondaq Ltd and/or its respective suppliers hereby disclaim all warranties and conditions with regard to this information, including all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement. In no event shall Mondaq Ltd and/or its respective suppliers be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of information available from this server.

The documents and related graphics published on this server could include technical inaccuracies or typographical errors. Changes are periodically added to the information herein. Mondaq Ltd and/or its respective suppliers may make improvements and/or changes in the product(s) and/or the program(s) described herein at any time.


Mondaq Ltd requires you to register and provide information that personally identifies you, including what sort of information you are interested in, for three primary purposes:

  • To allow you to personalize the Mondaq websites you are visiting.
  • To enable features such as password reminder, newsletter alerts, email a colleague, and linking from Mondaq (and its affiliate sites) to your website.
  • To produce demographic feedback for our information providers who provide information free for your use.

Mondaq (and its affiliate sites) do not sell or provide your details to third parties other than information providers. The reason we provide our information providers with this information is so that they can measure the response their articles are receiving and provide you with information about their products and services.

If you do not want us to provide your name and email address you may opt out by clicking here .

If you do not wish to receive any future announcements of products and services offered by Mondaq by clicking here .

Information Collection and Use

We require site users to register with Mondaq (and its affiliate sites) to view the free information on the site. We also collect information from our users at several different points on the websites: this is so that we can customise the sites according to individual usage, provide 'session-aware' functionality, and ensure that content is acquired and developed appropriately. This gives us an overall picture of our user profiles, which in turn shows to our Editorial Contributors the type of person they are reaching by posting articles on Mondaq (and its affiliate sites) – meaning more free content for registered users.

We are only able to provide the material on the Mondaq (and its affiliate sites) site free to site visitors because we can pass on information about the pages that users are viewing and the personal information users provide to us (e.g. email addresses) to reputable contributing firms such as law firms who author those pages. We do not sell or rent information to anyone else other than the authors of those pages, who may change from time to time. Should you wish us not to disclose your details to any of these parties, please tick the box above or tick the box marked "Opt out of Registration Information Disclosure" on the Your Profile page. We and our author organisations may only contact you via email or other means if you allow us to do so. Users can opt out of contact when they register on the site, or send an email to with “no disclosure” in the subject heading

Mondaq News Alerts

In order to receive Mondaq News Alerts, users have to complete a separate registration form. This is a personalised service where users choose regions and topics of interest and we send it only to those users who have requested it. Users can stop receiving these Alerts by going to the Mondaq News Alerts page and deselecting all interest areas. In the same way users can amend their personal preferences to add or remove subject areas.


A cookie is a small text file written to a user’s hard drive that contains an identifying user number. The cookies do not contain any personal information about users. We use the cookie so users do not have to log in every time they use the service and the cookie will automatically expire if you do not visit the Mondaq website (or its affiliate sites) for 12 months. We also use the cookie to personalise a user's experience of the site (for example to show information specific to a user's region). As the Mondaq sites are fully personalised and cookies are essential to its core technology the site will function unpredictably with browsers that do not support cookies - or where cookies are disabled (in these circumstances we advise you to attempt to locate the information you require elsewhere on the web). However if you are concerned about the presence of a Mondaq cookie on your machine you can also choose to expire the cookie immediately (remove it) by selecting the 'Log Off' menu option as the last thing you do when you use the site.

Some of our business partners may use cookies on our site (for example, advertisers). However, we have no access to or control over these cookies and we are not aware of any at present that do so.

Log Files

We use IP addresses to analyse trends, administer the site, track movement, and gather broad demographic information for aggregate use. IP addresses are not linked to personally identifiable information.


This web site contains links to other sites. Please be aware that Mondaq (or its affiliate sites) are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of these third party sites. This privacy statement applies solely to information collected by this Web site.

Surveys & Contests

From time-to-time our site requests information from users via surveys or contests. Participation in these surveys or contests is completely voluntary and the user therefore has a choice whether or not to disclose any information requested. Information requested may include contact information (such as name and delivery address), and demographic information (such as postcode, age level). Contact information will be used to notify the winners and award prizes. Survey information will be used for purposes of monitoring or improving the functionality of the site.


If a user elects to use our referral service for informing a friend about our site, we ask them for the friend’s name and email address. Mondaq stores this information and may contact the friend to invite them to register with Mondaq, but they will not be contacted more than once. The friend may contact Mondaq to request the removal of this information from our database.


This website takes every reasonable precaution to protect our users’ information. When users submit sensitive information via the website, your information is protected using firewalls and other security technology. If you have any questions about the security at our website, you can send an email to

Correcting/Updating Personal Information

If a user’s personally identifiable information changes (such as postcode), or if a user no longer desires our service, we will endeavour to provide a way to correct, update or remove that user’s personal data provided to us. This can usually be done at the “Your Profile” page or by sending an email to

Notification of Changes

If we decide to change our Terms & Conditions or Privacy Policy, we will post those changes on our site so our users are always aware of what information we collect, how we use it, and under what circumstances, if any, we disclose it. If at any point we decide to use personally identifiable information in a manner different from that stated at the time it was collected, we will notify users by way of an email. Users will have a choice as to whether or not we use their information in this different manner. We will use information in accordance with the privacy policy under which the information was collected.

How to contact Mondaq

You can contact us with comments or queries at

If for some reason you believe Mondaq Ltd. has not adhered to these principles, please notify us by e-mail at and we will use commercially reasonable efforts to determine and correct the problem promptly.