China: Abuse Of Dominance: New Developments In The Tetra Pak Decision

Last Updated: 25 January 2017
Article by Susan Ning, Kate Peng, Gao Sibo and Zhang Kai

On 16 November 2016, the State Administration for Industry and Commerce of the People's Republic of China ("SAIC") published its administrative penalty decision to fine Tetra Pak ("TP") for abuse of dominant market position. The SAIC imposed a fine totaling RMB 667.7 million bringing an end to a case that started in January 2012 and lasted for almost five years.

The SAIC found that from 2009 to 2013, TP abused its dominant position in aseptic carton packaging machinery for liquid food products ("machinery market"), technical services for aseptic carton packaging machinery for liquid food products ("technical service market"), and cartons for liquid food product aseptic packaging ("carton market"). The SAIC found that in Mainland China TP had without justifiable reasons conducted tie-in sales, exclusive dealing and loyalty discounts.

In this case the SAIC for the first time defined a "loyalty discount" as an "other forms of abuse of dominant market position confirmed as such by the Anti-Monopoly Enforcement Authority under the State Council" regulated under Article 17(1) (vii) of the Anti-Monopoly Law (the "AML"). By doing so, the theory of loyalty discounting (already widely acknowledged in the EU and the US) has been adopted as the seventh approach to regulate abusive conduct. This decision has great practical significance, and also brings new challenges and requirements to companies' compliance mechanisms.

In this article, we will review the case and the important legal issues it raises.

I. ADDRESSEES OF THE DECISION

The SAIC addressed the decision to six entities1 of the TP Group, and decided that the Group had dominant market position and had abused this position. In the end, the SAIC imposed fines on the six entities as a whole.

Points to note:

There is no "single economic entity" doctrine under the AML. Nor does the AML explicitly list factors2 to be considered when applying the "single economic entity" doctrine as some jurisdictions do (e.g. the EU). However, according to the current AML enforcement practice, it seems that in practice the concept of "single economic entity" has been to some extent taken into consideration by the enforcement authorities. For example, in the Chongqing Qingyang cartel case3, the National Development and Reform Commission ("NDRC") concluded that two affiliated companies (Chongqing Qingyang and Chongqing Datong) were common actors4. Nevertheless, it remains to be seen through future enforcement action about when the "single economic entity" doctrine will be applied and what factors will be considered when doing so.

II. DEFINITION OF THE RELEVANT MARKET

The SAIC defined three relevant product markets in this case: the machinery market, technical service market, and carton market. The SAIC defined the geographic market as Mainland China. When defining the relevant markets, the SAIC followed principles provided in the Guidance of the Anti-Monopoly Committee of the State Council for the Definition of the Relevant Market to conduct its analysis from both demand substitution and supply substitution5 perspectives. Please see the chart below for details.

Reason Relevant Market Product
Machinery Market Technical Service Market
(Spare Part + Maintenance Service)
Carton Market
Demand-side substitutability Distinctfrom non-aseptic packaging machinery and aseptic packaging machinery using other materials concerning technical characteristics and content to be packaged;

High switching cost for demanders.
Due to distinct differences between different types of machinery, there is no substitutable relationship between technical services for different types of machineries. Has distinct differences with other packaging materials in aseptic performance, content to be packaged, system costs, applicable machineries, etc.
Supply-side substitutability A huge amount of capital investment, know-how, and mature distribution channels needed to enter into the market;

Core technical barriers of high-end machineries;

Due to differences in the technologies and manufacturing processes, manufacturers in other packaging machinery markets cannot switch production rapidly.
There are barriers such as the complexity of machineries, the specificity of spare parts, etc. Carton market has comparatively high barriers in terms of capital investment and technology.

Practical entry barriers exist due to customer preference and difficulty to procure certain raw materials.
Reason Relevant Geographic Market
Mainland China
Demand-side Substitutability Liquid food product manufacturers in Mainland China have long-term, stable and unique demands on machinery, technical services and cartons.
Supply-side Substitutability Supplies are evidently regional; all of the manufacturers put products into the Chinese market through the sales channels in Mainland China.

Points to note:

The Antitrust Guidelines for Automotive Industry (Draft for Comments) mention that since "compatibility and lock-in effect exists in automotive aftermarket, automobile brand becomes an important relevant factor to be considered when defining the automotive aftermarket." This is generally interpreted to mean that given the existence of a "lock-in effect", the automotive aftermarket is likely to be defined as a single-brand market, where a manufacturer without dominant position in the automobile market is likely to hold a dominant position in aftermarket. In the TP case, the SAIC repeatedly reaffirms that "customers have a relatively strong dependency on machinery manufacturers", "once a specific kind of packaging machinery is selected, it will be very expensive to switch to other packaging machines", "TP machines' spare parts are mainly provided by TP", and that considering "the complexity of machineries and specificity of spare parts", "customers highly rely on TP for major repair works".However, it seems that SAIC does not think that these facts are sufficient to define a single-brand market, which reflects SAIC's prudent attitude towards this issue. The single-brand market theory would affect manufacturers' compliance obligations directly. Its development in China has always been a hot topic. We anticipate further clarifications on this theory's application through future legislation and enforcement activities.

III. DETERMINATION OF THE DOMINANT MARKET POSITION

To determine TP's market position in the three relevant markets, the SAIC mainly considered the following:

  • TP's market share and competition status in the relevant markets, including its competitive advantages in the relevant markets reflected by the changes of its sales margin and its profitability, etc.;
  • TP's ability to control the market, particularly prices and discounts as well as other trading conditions;
  • the extent to which other business operators (especially the users) depend on TP; and
  • the difficulty that other business operators encounter when entering the relevant markets.

Points to note:

Although the SAIC found that that TP's market share in middle and low-end machinery market and carton market declined in recent years, it still determined that TP has dominant market position. This is mainly based on the fact that TP's profit margin and profitability continued increasing in recent years, which reflects that competition in the relevant markets did not impair TP's pricing ability and product competitiveness and that competitors did not create obvious competition restraints on TP.This shows again that when conducting compliance reviews, it is not sufficient to only look at market share to evaluate market power.

When analyzing TP's ability to control the markets, the SAIC also took three kinds of abusive behaviors into consideration. It concluded that TP's imposition of unreasonable trading conditions and complex discounts demonstrated its ability to control the markets, which to some extent corresponds to the Supreme Court's view in the Qihoo360 v. Tencent. In this case the court found that defendant's market position can be evaluated through direct evidence of an elimination or restriction of competition. This approach is especially valuable when it is hard to accurately define the relevant market. Currently, there are relatively few cases in relation to the abuse of dominant market position. Whether enforcement authorities will skip the definition of relevant market and directly estimate the company's market power through its activities and its impact on market competition, or whether they will only use this approach as a supplementary tool to evaluate the company's market power is a question to be answered in future enforcement actions.

IV. ABUSIVE CONDUCT

1. Tie-in sales of cartons without justification

As shown in the above chart, from 2009 to 2013 TP set up performance validation periods (i.e. a period for testing the machinery's performance) and guarantee periods (i.e. the warranty period) when selling or renting its machinery. During these periods, TP required customers to use its cartons or cartons "approved by TP", "with equivalent quality" or "satisfying the lowest specification standard." Moreover, when providing technical service, TP's prerequisite for the provision of guaranty to the machinery's operation was that customers must use cartons provided by TP.

When analyzing these tie-in sales, the SAIC mainly considered three factors: (1) from the products functions, demands, and trading customs perspectives, paper-based aseptic packaging machinery and technical services both are independent from cartons; (2) the relevant behaviors were conducted without justifiable reasons; (3) the relevant conduct damaged competition in the market of the tied product (i.e. carton).

The SAIC concluded that TP was using its dominant position in machinery and technical service markets to impose restrictions on and affect customer's usage of cartons, which damaged the competition in the carton market. Therefore, TP's tie-in sales was a form of"implementing tie-in sales or imposing other unreasonable trading conditions at the time of trading without justifiable reasons" as prohibited by Article 17(1) (v) of the AML.

Points to note:

In its decision the SAIC did not specifically emphasize the 3rd element of tie-in sales as per Qihoo360 v. Tencent6 because it did not analyze whether TP forced its customers to accept the tied products. However, in the decision the SAIC pointed out that when selling or renting its machinery, the parties all signed the standard contract provided by TP. In that regard, it seems that the SAIC also considered whether customers had voluntarily accepted the tied cartons.

When analyzing whether relevant behaviors have "justifiable reasons", the SAIC mainly considered whether tie-in sales were in accordance with industry customs, if it was necessary for operators to conduct ordinary business operations or for public benefit, if tie-in sales exceeded the operator's right and power in the transaction, etc. This analysis provides some guidance for companies when evaluating whether their tie-in sales are justifiable.

Short-term tie-in sales may also be regarded as an abusive behavior. The time limits would mainly affect the analysis of anti-competition effect caused by the behavior. In the TP case, the SAIC pointed out that although the performance validation period did not seem to be very long, customers would face extra costs to switch to other manufacturers' cartons after the performance validation period because customers would need to debug and test the machinery again. Therefore tie-in sales during the performance validation period still has the effect of restricting customers to TP's carton and impeding customer's usage of or attempts to use other cartons thereby damaging competition in the carton market.

Allowing customers to use cartons "with equivalent quality" or that "satisfy the lowest specification standard" may have the effect of inducing customers to use the tied the product, due to the ambiguity of standards or because the requirement of being "equivalent" or satisfying "the lowest specification standard" would increase the burden on customers to conduct evaluations or tests.When there is relevant national standard, proposing a higher standard or conducting tie-in sales for reasons of securing safe manufacture or guarantying product quality may not be acceptable to the AML enforcement authorities.

2. Exclusive dealing without justification

The SAIC found that the raw materials for cartons include brown paper and white paper. Brown paper has advantages over white paper in terms of cost and performance. By 2014, Foshan Huaxin Packaging Ltd. and its subsidiary Zhuhai Special Economic Zone Hongta Renheng Paper Ltd. (collectively "Hongta") were the only companies that are able to achieve production at scale of brown paper.

Since 2009, TP "jointly developed" brown paper with Hongta. In 2011, TP and Hongta signed a Memorandum of Understanding and agreed that "the production capacity (of Hongta) shall be employed exclusively to produce brown paper for TP and its affiliates within the term of three years as agreed in the Cooperation Agreement". In addition, as provided in the Supply and Cooperation Agreement which is signed in 2012, "Hongta shall not provide any third party with products that were produced by implementing TP technical information".

The SAIC found that Hongta solely owns the patent of producing brown paper, and the technical information that TP excludes Hongta from usingis not proprietarily owned by TP. These restrictions on the use of non-proprietary technical information excluded Hongta from supplying brown paper to a third party. Therefore, restricting Hongta from cooperating with other carton manufacturers and restricting Hongta's implementation of non-proprietary technical information eliminated and restricted competition in the carton market.

Based on this, the SAIC held that TP's exclusive dealing behavior constituted a violation of Article 17(1) (iv) of the AML, which prohibits business operators with dominant market positions from "restricting the trading party to deal exclusively with the business operator or with the designated business operators without any justifiable reasons".

Points to note

When a business operator possesses non-proprietary technical information, it would be difficult to regard its behavior of restricting its trading party's implementation of such non-proprietary technical information (which may affect the production and supply of the relevant product) as justifiable reasons. Even for the IP rights holder, if it prohibits its trading party, in the IP related transactions, from dealing with a third party or if it imposes restrictions on the trading party's selection of trading partners, trading territory, or other trading conditions etc., such behaviors may face with the risks of being considered as abuse of IP rights to impose unreasonable conditions.

3. Loyalty discounts that eliminate or restrict competition

The SAIC identifies two types of loyalty discounts TP adopted in its carton business between 2009 and 2013: 1) retroactive accumulative volume discount ("retroactive accumulative discount" or "RAD") and 2) customized volume target discount ("target discount" or "TD"). RAD refers to a discount that is granted on all units purchased if a customer's purchase volume during a defined reference period exceeds a certain threshold. TD is a discount that is customized for individual customers and is granted on the condition that a customer's purchase volume during a defined reference period meets or exceeds the target percentage or a customized volume target.

The SAIC found that loyalty discounts have a loyalty inducing effect. Specifically, in the case of RAD, given that the discount applies to all units purchased during a defined reference period, when a customer's purchase volume reaches the threshold, the price that the customer needs to pay drops significantly. Therefore, to obtain more products at a lower price when a customer's purchase volume approaches the threshold, customers tend to continue purchasing until the threshold is met, which leads to a loyalty inducing effect. In the TD scenario, the business operator with dominant market position tends to condition its discount on the target percentage and volume target set forth specifically for individual customers, the direct consequence of which would be to lock-in the customer's purchase percentage or volume. In that sense, TD also has loyalty inducing effect.

By taking into account specific market conditions, the SAIC found that TP's loyalty discount had evident anti-competitive effects. Specifically, firstly some of TP's customers rely on TP's wide range of product categories and its production capacity, and therefore such reliance constitutes a "non-contestable portion of demand"7 of customers for TP products. Secondly, resulting from TP's tying arrangement during its provision of machinery and technical services, part of the "contestable portion of demand"8 has been locked-in to become a "non-contestable portion of demand", and thereby the "non-contestable portion of demand" is enlarged. Thirdly, the use of multiple discounts by TP further enlarges "non-contestable portion of demand" through a loyalty inducing effect, which turned the "contestable portion of demand" into a "non-contestable portion of demand" and consequently squeezed out the contestable spaces of other carton manufacturers. Therefore loyalty discounts allowed TP to restrict and affect the "contestable portion of demand" by taking advantage of the "non-contestable portion of demand", and leveraging TP's market power on the "non-contestable portion of demand" to the "contestable portion of demand".

Following on from this, the SAIC further analyzed whether loyalty discounts affected competition in the carton market. The SAIC found that in order to compete with TP, competitors have to match TP's price by providing larger discounts to attract clients to switch to them. Such discount provided by other competitors not only needs to be no less than TP's for "contestable portion of demand", but also must be able to compensate customers' loss of retroactive discount for "non-contestable portion of demand" due to their reduced purchase from TP. The SAIC concluded that therefore in the situation where the contestable portion of demand is rather limited as in this case, other competitors' prices must be lowered enough to match TP's, thus making it more difficult for other competitors to compete with TP who may even be forced to abandoncompetition. Competitors would then be foreclosed and the market competition would be eliminated or restricted. The SAIC determined that TP's loyalty discount scheme constitutes "other forms of abuse of dominant market position" as prohibited by Article 17(1) vii of the AML.

Points to note:

The SAIC's determination of loyalty discounts as abusive behavior under certain market conditions is consistent with commonly held opinionand antitrust practice in many other jurisdictions. Loyalty discounts are not per se illegal, and in fact competition authorities of many countries regard loyalty discounts as legitimate pricing arrangements, and recognize their pro-competitive effects that could allow clients and consumers to share the benefits of lower prices. Only in cases where loyalty discount reached the degree of "exclusive dealing" (concerning single-product retroactive accumulative discount9 and target discounts under EU law), "tying and bundling" (concerning multi-product retroactive accumulative discounts10 analyzed from the perspective of "multiple product rebates" under EU laws) or "predatory pricing" (concerning single-product retroactive accumulative discount under US law) will competition authorities step in and regulate loyalty discounts. As the NDRC has provided in Regulations of Anti-Price Monopoly11 issued in 2010, a business operator's price discount may achieve the effect of exclusive dealing.

In comparison with RAD, the SAIC in its decision specifically mentioned that in the case of incremental discounts, price discounts would only applies to the volume that exceeds the thresholdand regardless of the purchase volume, the price for one extra unit will never be zero or of negative value. In that regard, incremental discounts have relatively weak loyalty inducing effect to customers, and thus bear lower legal risks under AML.

V. CONCLUSION

As a landmark case of antitrust enforcement in recent years, this case involves almost five years of enforcement efforts, complicated facts and legal issues. In its 47-page penalty decision, the SAIC combines professional technologies, economics and laws in its studies and researches. This demonstrates the cautious and thoughtful approach taken by the SAIC. Notably, this case is the first case where the SAIC puts Article 17(1) (vii) of the AML into enforcement, regulating "loyalty discount" as "other forms of abusing the dominant market position as determined by the Anti-Monopoly Enforcement Authorities under the State Council". This embodies both theoretical and practical significance for antitrust enforcement, and also provides valuable guidance to business operators' in their compliance efforts.

Footnotes

1. Namely Tetra Pak International S.A. (headquarter of TP), Tetra Pak (China) Ltd. (headquarter of TP in Greater China Region), Tetra Pak Packaging (Kunshan) Ltd., Tetra Pak Packaging (Beijing) Ltd., Tetra Pak Packaging (Foshan) Ltd., and Tetra Pak Packaging (Hohhot) Ltd.

2. Such as the equity relationship between entities, composition and voting mechanism of boards of directors or supervisors, appointment and dismissal of senior management, veto rights on daily operations or strategic matters, etc.

3. Administrative Penalty Decision of the NDRC [2016] No.1.

4. The NDRC found that the largest shareholder of Chongqing Qingyang and Chongqing Datong were the same, the vice General Manager in charge of preparation sales in Chopngqing Qingyang was also the General Manager of Chongqing Datong, and the financial vice-manager of Chongqing Qingyang was also the financial chief of Chongqing Datong. Since 2014, allopurinol tablets of Qingyang brand was sold and billed by Chongqing Datong, and sales management of Chongqing Qingyang and Chongqing Datong was charged by the same person. Therefore, the NDRC concluded that Chongqing Qingyang and Chongqing Datong had consistency in decisions and actions and co-represented the party selling allopurinol tablets of brand Qingyang in monopoly agreement.

5. From the demand-side, the lower the substitutability between products is, the weaker the competitive relationship between the products is and the more unlikely it is for those products to be in the same relevant market. For supply-side substitutability, the more input and time needed and the more risks born for transforming production facilities to manufacture closely substitutable products, the lower the degree of substitutability is. Correspondingly it is harder for other operators to enter the relevant market rapidly and impose competition restraints on the relevant supplier. Therefore, it is unlikely for other operators to be in the same market with the relevant supplier.

6. As to the alleged tying by Tencent, the Supreme Court sets out the following criteria for "tying" for the purposes of Article 17 of the AML: 1) the tied product/service is distinct from the tying product/service; 2) the undertaking in question has a dominant position in the tying product/service market; 3) the dominant undertaking imposes certain restrictions on the consumers so that the consumers have no choice but to accept the tying product/service with the tied product/service; 4) tying is not justifiable, in the sense that it conflicts with trade customs and trade habits or ignores the tying product's functions; and 5) the alleged tying has a negative impact on competition. The summary and the criteria illustrated by the Supreme Court can be used as guidelines for understanding and proving abusive tying and bundling practices in the future.

7. "Non-contestable portion of demand" refers the portion of demand that can only be satisfied by dominant market players due to the clients' reliance on their product categories and production capacities.

8. "Contestable portion of demand" refers to the portion of demand that can be satisfied by both dominant market players and other market players simultaneously.

9. Single-product retroactive accumulative discount refers to a RAD that is granted based on the purchase of a single type of product.

10. Multi-product retroactive accumulative discount refers to a RAD that is granted based on the purchase of two or more types of products.

11. Article 14 of Regulations on Anti-Price Monopoly provides that, business operators with a dominant market position are prohibited from restricting their trading party through methods of such as providing price discount to deal exclusively with them or with the designated business operators without justifiable reasons.

The content of this article is intended to provide a general guide to the subject matter. Specialist advice should be sought about your specific circumstances.

To print this article, all you need is to be registered on Mondaq.com.

Click to Login as an existing user or Register so you can print this article.

Authors
 
Some comments from our readers…
“The articles are extremely timely and highly applicable”
“I often find critical information not available elsewhere”
“As in-house counsel, Mondaq’s service is of great value”

Related Topics
 
Related Articles
 
Up-coming Events Search
Tools
Print
Font Size:
Translation
Channels
Mondaq on Twitter
 
Register for Access and our Free Biweekly Alert for
This service is completely free. Access 250,000 archived articles from 100+ countries and get a personalised email twice a week covering developments (and yes, our lawyers like to think you’ve read our Disclaimer).
 
Email Address
Company Name
Password
Confirm Password
Position
Mondaq Topics -- Select your Interests
 Accounting
 Anti-trust
 Commercial
 Compliance
 Consumer
 Criminal
 Employment
 Energy
 Environment
 Family
 Finance
 Government
 Healthcare
 Immigration
 Insolvency
 Insurance
 International
 IP
 Law Performance
 Law Practice
 Litigation
 Media & IT
 Privacy
 Real Estate
 Strategy
 Tax
 Technology
 Transport
 Wealth Mgt
Regions
Africa
Asia
Asia Pacific
Australasia
Canada
Caribbean
Europe
European Union
Latin America
Middle East
U.K.
United States
Worldwide Updates
Registration (you must scroll down to set your data preferences)

Mondaq Ltd requires you to register and provide information that personally identifies you, including your content preferences, for three primary purposes (full details of Mondaq’s use of your personal data can be found in our Privacy and Cookies Notice):

  • To allow you to personalize the Mondaq websites you are visiting to show content ("Content") relevant to your interests.
  • To enable features such as password reminder, news alerts, email a colleague, and linking from Mondaq (and its affiliate sites) to your website.
  • To produce demographic feedback for our content providers ("Contributors") who contribute Content for free for your use.

Mondaq hopes that our registered users will support us in maintaining our free to view business model by consenting to our use of your personal data as described below.

Mondaq has a "free to view" business model. Our services are paid for by Contributors in exchange for Mondaq providing them with access to information about who accesses their content. Once personal data is transferred to our Contributors they become a data controller of this personal data. They use it to measure the response that their articles are receiving, as a form of market research. They may also use it to provide Mondaq users with information about their products and services.

Details of each Contributor to which your personal data will be transferred is clearly stated within the Content that you access. For full details of how this Contributor will use your personal data, you should review the Contributor’s own Privacy Notice.

Please indicate your preference below:

Yes, I am happy to support Mondaq in maintaining its free to view business model by agreeing to allow Mondaq to share my personal data with Contributors whose Content I access
No, I do not want Mondaq to share my personal data with Contributors

Also please let us know whether you are happy to receive communications promoting products and services offered by Mondaq:

Yes, I am happy to received promotional communications from Mondaq
No, please do not send me promotional communications from Mondaq
Terms & Conditions

Mondaq.com (the Website) is owned and managed by Mondaq Ltd (Mondaq). Mondaq grants you a non-exclusive, revocable licence to access the Website and associated services, such as the Mondaq News Alerts (Services), subject to and in consideration of your compliance with the following terms and conditions of use (Terms). Your use of the Website and/or Services constitutes your agreement to the Terms. Mondaq may terminate your use of the Website and Services if you are in breach of these Terms or if Mondaq decides to terminate the licence granted hereunder for any reason whatsoever.

Use of www.mondaq.com

To Use Mondaq.com you must be: eighteen (18) years old or over; legally capable of entering into binding contracts; and not in any way prohibited by the applicable law to enter into these Terms in the jurisdiction which you are currently located.

You may use the Website as an unregistered user, however, you are required to register as a user if you wish to read the full text of the Content or to receive the Services.

You may not modify, publish, transmit, transfer or sell, reproduce, create derivative works from, distribute, perform, link, display, or in any way exploit any of the Content, in whole or in part, except as expressly permitted in these Terms or with the prior written consent of Mondaq. You may not use electronic or other means to extract details or information from the Content. Nor shall you extract information about users or Contributors in order to offer them any services or products.

In your use of the Website and/or Services you shall: comply with all applicable laws, regulations, directives and legislations which apply to your Use of the Website and/or Services in whatever country you are physically located including without limitation any and all consumer law, export control laws and regulations; provide to us true, correct and accurate information and promptly inform us in the event that any information that you have provided to us changes or becomes inaccurate; notify Mondaq immediately of any circumstances where you have reason to believe that any Intellectual Property Rights or any other rights of any third party may have been infringed; co-operate with reasonable security or other checks or requests for information made by Mondaq from time to time; and at all times be fully liable for the breach of any of these Terms by a third party using your login details to access the Website and/or Services

however, you shall not: do anything likely to impair, interfere with or damage or cause harm or distress to any persons, or the network; do anything that will infringe any Intellectual Property Rights or other rights of Mondaq or any third party; or use the Website, Services and/or Content otherwise than in accordance with these Terms; use any trade marks or service marks of Mondaq or the Contributors, or do anything which may be seen to take unfair advantage of the reputation and goodwill of Mondaq or the Contributors, or the Website, Services and/or Content.

Mondaq reserves the right, in its sole discretion, to take any action that it deems necessary and appropriate in the event it considers that there is a breach or threatened breach of the Terms.

Mondaq’s Rights and Obligations

Unless otherwise expressly set out to the contrary, nothing in these Terms shall serve to transfer from Mondaq to you, any Intellectual Property Rights owned by and/or licensed to Mondaq and all rights, title and interest in and to such Intellectual Property Rights will remain exclusively with Mondaq and/or its licensors.

Mondaq shall use its reasonable endeavours to make the Website and Services available to you at all times, but we cannot guarantee an uninterrupted and fault free service.

Mondaq reserves the right to make changes to the services and/or the Website or part thereof, from time to time, and we may add, remove, modify and/or vary any elements of features and functionalities of the Website or the services.

Mondaq also reserves the right from time to time to monitor your Use of the Website and/or services.

Disclaimer

The Content is general information only. It is not intended to constitute legal advice or seek to be the complete and comprehensive statement of the law, nor is it intended to address your specific requirements or provide advice on which reliance should be placed. Mondaq and/or its Contributors and other suppliers make no representations about the suitability of the information contained in the Content for any purpose. All Content provided "as is" without warranty of any kind. Mondaq and/or its Contributors and other suppliers hereby exclude and disclaim all representations, warranties or guarantees with regard to the Content, including all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement. To the maximum extent permitted by law, Mondaq expressly excludes all representations, warranties, obligations, and liabilities arising out of or in connection with all Content. In no event shall Mondaq and/or its respective suppliers be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use of the Content or performance of Mondaq’s Services.

General

Mondaq may alter or amend these Terms by amending them on the Website. By continuing to Use the Services and/or the Website after such amendment, you will be deemed to have accepted any amendment to these Terms.

These Terms shall be governed by and construed in accordance with the laws of England and Wales and you irrevocably submit to the exclusive jurisdiction of the courts of England and Wales to settle any dispute which may arise out of or in connection with these Terms. If you live outside the United Kingdom, English law shall apply only to the extent that English law shall not deprive you of any legal protection accorded in accordance with the law of the place where you are habitually resident ("Local Law"). In the event English law deprives you of any legal protection which is accorded to you under Local Law, then these terms shall be governed by Local Law and any dispute or claim arising out of or in connection with these Terms shall be subject to the non-exclusive jurisdiction of the courts where you are habitually resident.

You may print and keep a copy of these Terms, which form the entire agreement between you and Mondaq and supersede any other communications or advertising in respect of the Service and/or the Website.

No delay in exercising or non-exercise by you and/or Mondaq of any of its rights under or in connection with these Terms shall operate as a waiver or release of each of your or Mondaq’s right. Rather, any such waiver or release must be specifically granted in writing signed by the party granting it.

If any part of these Terms is held unenforceable, that part shall be enforced to the maximum extent permissible so as to give effect to the intent of the parties, and the Terms shall continue in full force and effect.

Mondaq shall not incur any liability to you on account of any loss or damage resulting from any delay or failure to perform all or any part of these Terms if such delay or failure is caused, in whole or in part, by events, occurrences, or causes beyond the control of Mondaq. Such events, occurrences or causes will include, without limitation, acts of God, strikes, lockouts, server and network failure, riots, acts of war, earthquakes, fire and explosions.

By clicking Register you state you have read and agree to our Terms and Conditions