Australia: Around The Grounds: The Current Status Of Combustible Cladding In Australia - Owner Pays?

Last Updated: 6 November 2018
Article by Maxine Tills

The approach to combustible cladding on existing buildings in Australia is not uniform with each state providing a different response to the risk posed by combustible cladding on public and private buildings.

New South Wales

From 15 August 2018, the use of aluminium composite panels (ACPs) with a core comprised of more than 30% polyethylene in any external cladding, external wall, external installation, façade or rendered finish in certain buildings, has effectively been banned.

This essentially is residential apartment buildings, hotels, office buildings, shopping centres, carparks and warehouses, factories and hospitals and other public buildings.  The ban does not apply to all buildings in those classes but only to those buildings with a number of storeys and of a certain construction type.

The ban operates retrospectively and thus applies to buildings constructed before the ban came into force, as well as those currently being built and any future buildings.  The ban applies even if the use of the ACPs was in accordance with the National Construction Code (NCC).

There are two exceptions:

(a) where the ACPs have successfully passed the Australian Standard test (AS1530.1) for combustibility prescribed by the NCC and an accredited testing laboratory has produced the test results on or after 1 July 2017;

(b) the ACP and the proposed wall assembly has successfully passed the Australian Standard test (AS5113) and the person or entity intending to use the ACP has declared by statutory declaration that the ACP will be installed in a manner identical to the tested prototype and an accredited testing laboratory has produced the test results on or after 1 July 2017.

It seems to be recognised in the industry that it is not easy to comply with either test.

What does this mean for existing buildings?

Owners of buildings and strata bodies that have banned ACPs in any external wall, external insulation, façade or rendered finish may be compelled by rectification order of the local council to remove and replace the banned ACPs on existing buildings if the safety risk cannot be minimised or eliminated.1

The use of combustible cladding after the ban or failure to act on a building rectification order may result in corporations facing fines up to $1.1 million (with $110,000 continuing per day for each day the offence continues).  Individuals may face up to $220,000 or two years imprisonment or both (with a penalty of $4,000 continuing per day for each day the offence continues).

Builders, manufacturers and suppliers may potentially be liable for contravening the ban.

The use of combustible ACPs is now treated as a major defect in residential work and an extended statutory warranty period of six years now applies.2  The extended warranty period for combustible ACPs applies if the owner is still able to bring proceedings for breach of the warranty or the warranty period has not yet commenced.  The warranty period generally commences on completion of the works.

This means that where the building work has been completed less than 6 years ago, an owner may recover from the builder or developer in relation to the use of combustible ACPs under the statutory warranty.

Fire Safety and External Wall Cladding Taskforce Audit

The Taskforce has assessed over 2,280 sites.  Four hundred and seventeen (417) buildings require further assessment as a high priority because they have cladding which potentially increases fire risks.  Two hundred and twenty-two (222) of 417 buildings are residential buildings, with 85 classified as high rise (more than 8-storeys).

The Taskforce in conjunction with the National Building Ministers Forum will also investigate and report on costs responsibility in meeting rectification costs caused by the use of combustible ACPs.  A report on this aspect has yet to be released.

Owners of certain buildings which have combustible cladding are required from 22 October 2018 to register the building with the NSW Government through their online portal.

Victoria

There have been various amendments to the Building Act 1993 (Vic) to strengthen laws in respect of inspection, testing and notice requirements of building works.

Victoria has been at the forefront of responding to the risks associated with the use of combustible ACP cladding.  It experienced the Lacrosse apartment fire in 2014 and proceedings by the apartment owners against the builder are currently before the Victorian Civil and Administrative Tribunal. 

Victorian Cladding Taskforce

The Victoria Cladding Taskforce has issued its October update which notes that the Victorian Building Authority (VBA) has completed its initial assessment of 1,369 building and planning permits where ACP cladding is a construction material.  Following the audit:

  • Emergency orders have been issued to owners of 12 buildings for urgent short‑term remediation.  The remediation may include further fire safety measures and removing ignition sources.
  • The Taskforce has reported that only a very small percentage of low rise buildings in suburban Melbourne and regional cities have combustible ACP cladding, the high risk buildings are 2 or 3 storeys high with a single exit and inadequate fire safety measures.
  • The Taskforce has noted it is difficult to identify ACPs with a polyethylene core – even for highly qualified and experienced building practitioners.  It is often necessary to undertake destructive testing.

In the audit, the VBA was able to deal with non‑compliant cladding on buildings currently in the planning stage and under construction as well as existing buildings.

Building notices which are essentially show cause notices to owners corporations have been issued.  The notice requires the owners corporation to show why combustible cladding should not be removed.  These were issued to about 150 buildings.

The process allows owners corporations the opportunity to provide evidence that the building is safe without the removal of the cladding.  However, the VBA has the right to disagree with that evidence.

The VBA has found 43 buildings in a higher risk category and the VBA has been appointed as the municipal building surveyor for those buildings plus another one for which it is also municipal building surveyor.  In relation to these 44 buildings, there is a longer term rectification issue which may involve removal of some or all of the cladding.

The Taskforce has also recommended that the Victorian government undertake an audit of all government owned and leased buildings.

The Building Amendment (Registration of Trades and Other Matters) Act 2018 (the Act) provided for Cladding Rectification Agreements (CRAs).  That part of the Act comes into operation on 30 October 2018.

The CRA scheme is a voluntary scheme entered into by owners corporations, councils and lenders to raise the funds necessary to rectify cladding and allows loan repayments to be made through an individual owner's council rates.  On settlement of a sale of a unit, the CRA transfers to the purchaser.

The CRA scheme identifies that it is individual unit owners who will bear the costs of rectifying combustible cladding.

Queensland

The approach in Queensland to private buildings with potentially combustible ACPs is to put the onus on the building's owners to undertake the necessary investigation and rectification measures.  The report of the Non-Conforming Building Products Audit Taskforce released in May 2018 recommended a strong regulatory role be taken by the Queensland Government to ensure private building owners adequately address the safety issues posed by combustible cladding.

The Building and Other Legislation (Cladding) Amendment Regulation 2018 (Qld) came into effect on 1 October 2018.  The Regulation requires private building owners of in-scope buildings to register through a Safer Buildings website and to complete an online checklist.  Buildings which are in-scope are those buildings for which a development approval was given after 1 January 1994 to construct or alter the building and the building is a Class 2 to 9 building of Type A or B construction.

The buildings which are in-scope are most high rise residential and commercial buildings.  The owner of a building subject to a community title scheme is the body corporate.

The Regulation requires building owners to:

  • Register on the Queensland Building and Construction Commission's online assessment system and provide a completed combustible cladding checklist by 29 March 2019.
  • If the building might be affected by combustible cladding, a fire safety engineer must be engaged to complete a fire safety risk assessment by 27 August 2019.  The assessment must be submitted by 3 May 2021.

If in the process it is ascertained the building is affected by combustible cladding, a notice that the building is affected by combustible cladding is to be displayed and the notice and the fire safety risk assessment are to be given to each owner and tenant within 60 days of receiving the fire safety risk assessment. 

Clearly the costs of complying with the Regulation will be borne by the owners of the buildings.  A building notice would affect the value of the units in the building and also impact on the rental returns.

Western Australia

Cladding Audit

The Western Australian Building Commission is conducting a state-wide cladding audit of all high-rise buildings with ACP cladding attached.  The scope of the audit is of privately owned buildings three storeys or higher and built or refurbished between 1 January 2001 to 30 June 2017 with ACP cladding on the building's exterior.  The buildings prioritised are residential, hospital, aged care and assembly buildings.

The status update of 11 October 2018 identified a total of 1,734 privately owned buildings with ACP cladding attached.  Of these 238 required a detailed risk assessment with 120 completed.  No further action is required for 118 buildings while two buildings have been referred to the permit authority for further action.

On 6 October 2018, the Building Amendment Regulations (No. 2) 2018 came into effect in Western Australia.  The Regulations now prescribe applicable building standards for non‑combustible external walls.  Rather than banning particular products as in some of the other States, the Regulations seek to control the performance of an external wall in a fire event by requiring external walls of certain buildings comply with the deemed to satisfy requirements of the Building Code of Australia.  Any performance solution proposed is required to satisfy full scale fire testing. 

The Regulations are not retrospective.

Owner pays

Currently in Australia, the responsibility for rectifying cladding is borne by the owner.  In high rise buildings this is usually the owners corporation.  In NSW, the inclusion of combustible cladding as a major defect gives owners a remedy against the builder or developer under the statutory warranty provisions of the Home Building Act 1989.

In our previous update for insurers dated 30 November 2017, we discussed the current issues for property, public liability and professional indemnity insurers.  Almost a year down the track, the extent of the problem of combustible cladding on existing buildings is becoming clearer.  From the audits conducted in each of the four larger states, it is clear that a reasonable number of buildings will require rectification although perhaps not in the numbers first anticipated.

It remains the case for construction professionals and their professional indemnity insurers that owners will seek to recover the costs of rectification from builders under the statutory warranty regimes in each state. Claims in negligence by owners corporations against building and construction professionals for pure economic loss (rectification costs) are limited because a duty of care in negligence does not usually extend to subsequent owners.

In our experience, high rise commercial and residential building work is usually undertaken by contractors under design and construct contracts.  The consultants such as the certifier and fire engineer are usually retained by the contractor, and often if the developer has retained the architect that contract is novated to the contractor.  The contractor ought to have professional indemnity insurance for a design and construct contract.  The contractor is likely to seek to recover any rectification costs from its consultants.

There remains the potential for significant litigation arising from the use of combustible cladding mostly as an attachment on high rise buildings in Australia.  The judgment in the litigation regarding the rectification of the Lacrosse apartments in Melbourne likely to be delivered by the end of the year may provide some guidance.  However, each case will have to be considered on its own facts which means there is no one answer that fits all to the question of who pays.

Footnotes

1 Building Products (Safety) Act 2017 (NSW).

2 Home Building Amendment (Cladding) Regulation 2018.

The content of this article is intended to provide a general guide to the subject matter. Specialist advice should be sought about your specific circumstances.

To print this article, all you need is to be registered on Mondaq.com.

Click to Login as an existing user or Register so you can print this article.

Authors
Similar Articles
Relevancy Powered by MondaqAI
 
Some comments from our readers…
“The articles are extremely timely and highly applicable”
“I often find critical information not available elsewhere”
“As in-house counsel, Mondaq’s service is of great value”

Related Topics
 
Similar Articles
Relevancy Powered by MondaqAI
Related Articles
 
Up-coming Events Search
Tools
Print
Font Size:
Translation
Channels
Mondaq on Twitter
 
Register for Access and our Free Biweekly Alert for
This service is completely free. Access 250,000 archived articles from 100+ countries and get a personalised email twice a week covering developments (and yes, our lawyers like to think you’ve read our Disclaimer).
 
Email Address
Company Name
Password
Confirm Password
Position
Mondaq Topics -- Select your Interests
 Accounting
 Anti-trust
 Commercial
 Compliance
 Consumer
 Criminal
 Employment
 Energy
 Environment
 Family
 Finance
 Government
 Healthcare
 Immigration
 Insolvency
 Insurance
 International
 IP
 Law Performance
 Law Practice
 Litigation
 Media & IT
 Privacy
 Real Estate
 Strategy
 Tax
 Technology
 Transport
 Wealth Mgt
Regions
Africa
Asia
Asia Pacific
Australasia
Canada
Caribbean
Europe
European Union
Latin America
Middle East
U.K.
United States
Worldwide Updates
Registration (you must scroll down to set your data preferences)

Mondaq Ltd requires you to register and provide information that personally identifies you, including your content preferences, for three primary purposes (full details of Mondaq’s use of your personal data can be found in our Privacy and Cookies Notice):

  • To allow you to personalize the Mondaq websites you are visiting to show content ("Content") relevant to your interests.
  • To enable features such as password reminder, news alerts, email a colleague, and linking from Mondaq (and its affiliate sites) to your website.
  • To produce demographic feedback for our content providers ("Contributors") who contribute Content for free for your use.

Mondaq hopes that our registered users will support us in maintaining our free to view business model by consenting to our use of your personal data as described below.

Mondaq has a "free to view" business model. Our services are paid for by Contributors in exchange for Mondaq providing them with access to information about who accesses their content. Once personal data is transferred to our Contributors they become a data controller of this personal data. They use it to measure the response that their articles are receiving, as a form of market research. They may also use it to provide Mondaq users with information about their products and services.

Details of each Contributor to which your personal data will be transferred is clearly stated within the Content that you access. For full details of how this Contributor will use your personal data, you should review the Contributor’s own Privacy Notice.

Please indicate your preference below:

Yes, I am happy to support Mondaq in maintaining its free to view business model by agreeing to allow Mondaq to share my personal data with Contributors whose Content I access
No, I do not want Mondaq to share my personal data with Contributors

Also please let us know whether you are happy to receive communications promoting products and services offered by Mondaq:

Yes, I am happy to received promotional communications from Mondaq
No, please do not send me promotional communications from Mondaq
Terms & Conditions

Mondaq.com (the Website) is owned and managed by Mondaq Ltd (Mondaq). Mondaq grants you a non-exclusive, revocable licence to access the Website and associated services, such as the Mondaq News Alerts (Services), subject to and in consideration of your compliance with the following terms and conditions of use (Terms). Your use of the Website and/or Services constitutes your agreement to the Terms. Mondaq may terminate your use of the Website and Services if you are in breach of these Terms or if Mondaq decides to terminate the licence granted hereunder for any reason whatsoever.

Use of www.mondaq.com

To Use Mondaq.com you must be: eighteen (18) years old or over; legally capable of entering into binding contracts; and not in any way prohibited by the applicable law to enter into these Terms in the jurisdiction which you are currently located.

You may use the Website as an unregistered user, however, you are required to register as a user if you wish to read the full text of the Content or to receive the Services.

You may not modify, publish, transmit, transfer or sell, reproduce, create derivative works from, distribute, perform, link, display, or in any way exploit any of the Content, in whole or in part, except as expressly permitted in these Terms or with the prior written consent of Mondaq. You may not use electronic or other means to extract details or information from the Content. Nor shall you extract information about users or Contributors in order to offer them any services or products.

In your use of the Website and/or Services you shall: comply with all applicable laws, regulations, directives and legislations which apply to your Use of the Website and/or Services in whatever country you are physically located including without limitation any and all consumer law, export control laws and regulations; provide to us true, correct and accurate information and promptly inform us in the event that any information that you have provided to us changes or becomes inaccurate; notify Mondaq immediately of any circumstances where you have reason to believe that any Intellectual Property Rights or any other rights of any third party may have been infringed; co-operate with reasonable security or other checks or requests for information made by Mondaq from time to time; and at all times be fully liable for the breach of any of these Terms by a third party using your login details to access the Website and/or Services

however, you shall not: do anything likely to impair, interfere with or damage or cause harm or distress to any persons, or the network; do anything that will infringe any Intellectual Property Rights or other rights of Mondaq or any third party; or use the Website, Services and/or Content otherwise than in accordance with these Terms; use any trade marks or service marks of Mondaq or the Contributors, or do anything which may be seen to take unfair advantage of the reputation and goodwill of Mondaq or the Contributors, or the Website, Services and/or Content.

Mondaq reserves the right, in its sole discretion, to take any action that it deems necessary and appropriate in the event it considers that there is a breach or threatened breach of the Terms.

Mondaq’s Rights and Obligations

Unless otherwise expressly set out to the contrary, nothing in these Terms shall serve to transfer from Mondaq to you, any Intellectual Property Rights owned by and/or licensed to Mondaq and all rights, title and interest in and to such Intellectual Property Rights will remain exclusively with Mondaq and/or its licensors.

Mondaq shall use its reasonable endeavours to make the Website and Services available to you at all times, but we cannot guarantee an uninterrupted and fault free service.

Mondaq reserves the right to make changes to the services and/or the Website or part thereof, from time to time, and we may add, remove, modify and/or vary any elements of features and functionalities of the Website or the services.

Mondaq also reserves the right from time to time to monitor your Use of the Website and/or services.

Disclaimer

The Content is general information only. It is not intended to constitute legal advice or seek to be the complete and comprehensive statement of the law, nor is it intended to address your specific requirements or provide advice on which reliance should be placed. Mondaq and/or its Contributors and other suppliers make no representations about the suitability of the information contained in the Content for any purpose. All Content provided "as is" without warranty of any kind. Mondaq and/or its Contributors and other suppliers hereby exclude and disclaim all representations, warranties or guarantees with regard to the Content, including all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement. To the maximum extent permitted by law, Mondaq expressly excludes all representations, warranties, obligations, and liabilities arising out of or in connection with all Content. In no event shall Mondaq and/or its respective suppliers be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use of the Content or performance of Mondaq’s Services.

General

Mondaq may alter or amend these Terms by amending them on the Website. By continuing to Use the Services and/or the Website after such amendment, you will be deemed to have accepted any amendment to these Terms.

These Terms shall be governed by and construed in accordance with the laws of England and Wales and you irrevocably submit to the exclusive jurisdiction of the courts of England and Wales to settle any dispute which may arise out of or in connection with these Terms. If you live outside the United Kingdom, English law shall apply only to the extent that English law shall not deprive you of any legal protection accorded in accordance with the law of the place where you are habitually resident ("Local Law"). In the event English law deprives you of any legal protection which is accorded to you under Local Law, then these terms shall be governed by Local Law and any dispute or claim arising out of or in connection with these Terms shall be subject to the non-exclusive jurisdiction of the courts where you are habitually resident.

You may print and keep a copy of these Terms, which form the entire agreement between you and Mondaq and supersede any other communications or advertising in respect of the Service and/or the Website.

No delay in exercising or non-exercise by you and/or Mondaq of any of its rights under or in connection with these Terms shall operate as a waiver or release of each of your or Mondaq’s right. Rather, any such waiver or release must be specifically granted in writing signed by the party granting it.

If any part of these Terms is held unenforceable, that part shall be enforced to the maximum extent permissible so as to give effect to the intent of the parties, and the Terms shall continue in full force and effect.

Mondaq shall not incur any liability to you on account of any loss or damage resulting from any delay or failure to perform all or any part of these Terms if such delay or failure is caused, in whole or in part, by events, occurrences, or causes beyond the control of Mondaq. Such events, occurrences or causes will include, without limitation, acts of God, strikes, lockouts, server and network failure, riots, acts of war, earthquakes, fire and explosions.

By clicking Register you state you have read and agree to our Terms and Conditions